Hi Maxime, On Thu, 22 Oct 2020 at 11:13, Maxime Ripard <[email protected]> wrote: > > Hi, > > On Thu, Oct 22, 2020 at 09:52:29AM +0200, Clément Péron wrote: > > Hi Philipp, > > > > On Thu, 22 Oct 2020 at 00:10, Philip Rinn <[email protected]> wrote: > > > > > > Hi, > > > > > > the Olimex A64-OLinuXino board comes in various variants, three with eMMC. > > > While MMC HS-DDR mode works fine on one of them (A64-OLinuXino-1Ge4GW) it > > > doesn't work on the A64-OLinuXino-2Ge8G-IND variant (I don't have the > > > third variant so I can't check if it works there). > > > > We got similar situations for Allwinner H6 (Beelink GS1 and Tanix TX6). > > > > There is definitely an issue in the MMC sunxi driver with HS-DDR mode > > and it's not limited to "olimex,a64-olinuxino-emmc". > > > > Have a look at this this message posted by Jernej: > > https://www.spinics.net/lists/arm-kernel/msg846093.html > > > > I think we should disable the HS-DDR mode for A64 / H6 like it's done > > for H5 and not disable board per board until the issue is resolved. > > I'm not opposed to that on principle, but "it doesn't work on some > board" is not a proper justification to do so. It does on some others, > so surely there's more to it and this would just paper over whatever > issue we have instead of properly fixing it.
Maybe the term board is not correct, maybe it's the eMMC chip which is different. I don't know if all Beelink GS1/Tanix TX6 use the same eMMC chip for all the boards. > > > If you want to disable only for your board you can set in your > > device-tree: mmc-hs200-1_8v; This will switch to HS200 mode without > > using the HS-DDR mode. > > Sigh. Can we at least work on a fix instead of providing terrible > workarounds? I agree with you on this, but my board doesn't have this issue and I tried to read the vendor kernel and spot a difference but didn't find anything relevant. Regards, Clement > > Maxime -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/CAJiuCcfyx734fo52VU4t5jF6pZ7vcg4VR1HhWMzg_UW9Xfaj8A%40mail.gmail.com.
