Dne sreda, 02. december 2020 ob 14:54:02 CET je Andre Przywara napisal(a):
> While comparing clocks between the H6 and H616, some of the M factor
> ranges were found to be wrong: the manual says they are only covering
> two bits [1:0], but our code had "5" in the number-of-bits field.
>
> By writing 0xff into that register in U-Boot and via FEL, it could be
> confirmed that bits [4:2] are indeed masked off, so the manual is right.
>
> Change to number of bits in the affected clock's description.
>
> Fixes: 524353ea480b ("clk: sunxi-ng: add support for the Allwinner H6 CCU")
> Signed-off-by: Andre Przywara <[email protected]>
Reviewed-by: Jernej Skrabec <[email protected]>
Best regards,
Jernej
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web, visit
https://groups.google.com/d/msgid/linux-sunxi/2017247.PyFJg3gf1G%40kista.
