On Fri, 11 Dec 2020 16:56:59 +0100, Paul Kocialkowski wrote: > The A31 CSI controller supports two distinct input interfaces: > parallel and an external MIPI CSI-2 bridge. The parallel interface > is often connected to a set of hardware pins while the MIPI CSI-2 > bridge is an internal FIFO-ish link. As a result, these two inputs > are distinguished as two different ports. > > Note that only one of the two may be present on a controller instance. > For example, the V3s has one controller dedicated to MIPI-CSI2 and one > dedicated to parallel. > > Update the binding with an explicit ports node that holds two distinct > port nodes: one for parallel input and one for MIPI CSI-2. > > This is backward-compatible with the single-port approach that was > previously taken for representing the parallel interface port, which > stays enumerated as fwnode port 0. > > Note that additional ports may be added in the future, especially to > support feeding the CSI controller's output to the ISP. > > Signed-off-by: Paul Kocialkowski <[email protected]> > --- > .../media/allwinner,sun6i-a31-csi.yaml | 88 ++++++++++++++++--- > 1 file changed, 75 insertions(+), 13 deletions(-) >
Reviewed-by: Rob Herring <[email protected]> Though, it may need updating to use video-interfaces and graph schemas[1] depending what lands first. [1] https://lore.kernel.org/linux-devicetree/[email protected]/ -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/20201214231231.GA2555279%40robh.at.kernel.org.
