On 5/19/21 5:41 AM, Andre Przywara wrote:
> The AXP305 PMIC used in AXP805 seems to be fully compatible to the
                  ^^^^^^^^^^^^^^
Typo? Do you mean "used with the H616 SoC"?

> AXP805 PMIC, so add the proper chain of compatible strings.
> 
> Also at least on one board (Orangepi Zero2) there is no interrupt line
> connected to the CPU, so make the "interrupts" property optional.
> 
> Signed-off-by: Andre Przywara <andre.przyw...@arm.com>
> ---
>  Documentation/devicetree/bindings/mfd/axp20x.txt | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt 
> b/Documentation/devicetree/bindings/mfd/axp20x.txt
> index 4991a6415796..4fd748101e3c 100644
> --- a/Documentation/devicetree/bindings/mfd/axp20x.txt
> +++ b/Documentation/devicetree/bindings/mfd/axp20x.txt
> @@ -26,10 +26,10 @@ Required properties:
>      * "x-powers,axp803"
>      * "x-powers,axp806"
>      * "x-powers,axp805", "x-powers,axp806"
> +    * "x-powers,axp803", "x-powers,axp805", "x-powers,axp806"
                   ^^^^^^
This should be x-powers,axp305.

Regards,
Samuel

>      * "x-powers,axp809"
>      * "x-powers,axp813"
>  - reg: The I2C slave address or RSB hardware address for the AXP chip
> -- interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin
>  - interrupt-controller: The PMIC has its own internal IRQs
>  - #interrupt-cells: Should be set to 1
>  
> @@ -43,6 +43,7 @@ more information:
>                       AXP20x/LDO3: software-based implementation
>  
>  Optional properties:
> +- interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin
>  - x-powers,dcdc-freq: defines the work frequency of DC-DC in KHz
>                     AXP152/20X: range:  750-1875, Default: 1.5 MHz
>                     AXP22X/8XX: range: 1800-4050, Default: 3   MHz
> 

-- 
You received this message because you are subscribed to the Google Groups 
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to linux-sunxi+unsubscr...@googlegroups.com.
To view this discussion on the web, visit 
https://groups.google.com/d/msgid/linux-sunxi/7ebfaef7-5cf2-e60c-99ef-4275c873e72d%40sholland.org.

Reply via email to