The anx6345 bridge mandates that the input port is named port@0. Since
we have a unit-address, this implies that we need a reg property with
the same value, but it was found to be missing in the Teres-I device
tree. Make sure it's there.
Signed-off-by: Maxime Ripard <max...@cerno.tech>
---
arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
index 45e1abdf70a0..52e032f7fb68 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
@@ -139,6 +139,8 @@ ports {
#size-cells = <0>;
port@0 {
+ reg = <0>;
+
anx6345_in: endpoint {
remote-endpoint = <&tcon0_out_anx6345>;
};
--
2.31.1
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@googlegroups.com.
To view this discussion on the web, visit
https://groups.google.com/d/msgid/linux-sunxi/20210721140424.725744-52-maxime%40cerno.tech.
