在 2021-06-16星期三的 11:14 +0200，Maxime Ripard写道： > Hi, > > On Tue, Jun 15, 2021 at 12:06:23PM +0100, Andre Przywara wrote: > > Some newer Allwinner RTCs (for instance the one in the H616 SoC) > > lack > > a pin for an external 32768 Hz oscillator. As a consequence, this > > LOSC > > can't be selected as the RTC clock source, and we must rely on the > > internal RC oscillator. > > To allow additions of clocks to the RTC node, add a feature bit to > > ignore > > any provided clocks for now (the current code would think this is > > the > > external LOSC). Later DTs and code can then for instance add the > > PLL > > based clock input, and older kernel won't get confused. > > > > Signed-off-by: Andre Przywara <andre.przyw...@arm.com> > > Honestly, I don't really know if it's worth it at this point. > > If we sums this up: > > - The RTC has 2 features that we use, mostly centered around 2 > registers set plus a global one > > - Those 2 features are programmed in a completely different way > > - Even the common part is different, given the discussion around the > clocks that we have. > > What is there to share in that driver aside from the probe, and maybe > the interrupt handling? Instead of complicating this further with > more > special case that you were (rightfully) complaining about, shouldn't > we > just acknowledge the fact that it's a completely separate design and > should be treated as such, with a completely separate driver?
I think our problem is just that we're having a single driver for both functionalities (clock manager and RTC). Personally I don't think we should have seperated driver for clock managers, although I am fine with seperated RTC driver for linear days. By the way, not having a LOSC is only what happens on H616, maybe because there should never be a battery-backed H616 device. On R329, the RTC part has linear day storage, but it still have LOSC. Because of this, I don't think we should duplicate at least at least the current sun6i-rtc dual-functionality driver, because the clock funtionality is just the same with previous SoCs on R329. > > Maxime -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/1e49692a2f4548ae942e170bc1ae9431a6eb512e.camel%40aosc.io.
