Hey all, I'm trying to upstream support for the Allwinner V5 using the Lindenis V5 SBC <http://wiki.lindeni.org/index.php/Lindenis_V5>. I hope to eventually build a completely open source stereo camera board using the SOC. Before building the hardware I want to ensure I can provide proper support for building images in Buildroot. The vendor's BSP is a really old fork of uboot and Linux (2014), I've been merging some parts from the forks.
This is what I've done so far. 1. Pulled in the sun8iw12p1-*.dts from forks. Files here <https://pastebin.com/raw/N7HxS8Zm>. 2. Took genimage.cfg from board/olimex/a33_olinuxino/genimage.cfg 3. Several u-boot patches here <https://pastebin.com/raw/DdFppeM0>, 1. Merging in cpu_sun8i.h from the vendor fork 2. Snubbing out functions in arch/arm/cpu/armv7/sunxi/psci.c 3. Added the board aliased against some CONFIG_MACH_SUN50I_H6 config. As the H6 is a similar chip. 4. Took board/interruptlabs/stereo/lindenis_v5_defconfig from the vendor linux fork. Here is the entire diff <https://pastebin.com/raw/TvfP7HAu>. I've created a sdcard image, flashed it, and powered it up but nothing yet. I would really appreciate any guidance, documents or feedback on this task. Thanks! -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/fde97d20-4aea-401d-8bb3-9cac3bfad66en%40googlegroups.com.
