Hi, guys. Is enyone interested in participating in adding support for f1c800 in u-boot? I have Melis SDK, current status is: disassembled using IDA boot0, reversed all uart-clock-dram-related stuff, u-boot starts, spawns messages to console, but seems i made a mistake somewhere or most likely can't find usual AW init magic, because after my dram_init every register related to clock/dram mimics those after init using original boot0, but dram anyway fails to read and fails at 10-th write, so dram_size_detect can't be passed. Original boot0.bin 100% ok, burned it to sd-card, device detects dram, passes all tests and fails at part where it wants boot1, i have it as a separate bin but can't use because boot0 want it on flash instead of sd-card, my custom board have only sd-card. If someone interested in such project, mail me, i'll upload somewhere my u-boot sources.
-- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. To view this discussion, visit https://groups.google.com/d/msgid/linux-sunxi/47a49d67-e646-48e2-840e-91d8bc005199n%40googlegroups.com.
