-----BEGIN PGP SIGNED MESSAGE-----

I have been trying different sources to find out exactly what my
Conner CTT800E was and why it doesn't work with 'ftape; One of the
places I wrote was to the QIC standards web site (http://www.qic.org).
The reply from the head fo the driver team at Seagate follows. Unless
I am completely missing the point of what was said the CTT800E should
work with 'ftape.' I am now back to sqaure one, assuming the response
below is correct, what do I need to do to get 'ftape' working with my
drive? I tried the Trakker driver and got the errors posted
previously. I saw no reference to a 'Shuttle' drive and what I got
when I downloaded 'ftape' were 2 drivers (Backpack and Trakker). Am I
missing some drivers, losing my mind or is my configuration still
messed up? TIA.

>
>I head up the device driver team at Seagate. This drive is a TR-1
drive
>attached to the parallel port (PPT). The drive conforms to QIC-80
(recording
>format) and QIC-117 (command set). The caveat is there is no
"standard" for
>communicating through the PPT to a tape drive. There are 5 different
PPT
>ASICs used by tape drive manufacturers. This particular drive uses a
>MicroSolutions ASIC. So it works like this: send proprietary commands
>through the parallel port to the ASIC, which controls the FDC, which
>accesses the tape drive. If I remember correctly, ftape supports 2
ASICs
>already (Colorado Trakker and Shuttle). The specifications for ASICs
are
>sometimes closely guarded, but you might want to contact
MicroSolutions to
>request specs / source code. One word of caution: supporting a FDC
type PPT
>tape drive is probably the most complex to deal with of any storage
device
>configuration.
>
>Paul Boehler 
>

-----BEGIN PGP SIGNATURE-----
Version: PGP Personal Privacy 6.0.2

iQEVAwUBNs3+2G4UNPcD1WilAQHb4Af+ObS10t229Cnp24BOWEpc+GTuwzy8xxp7
bS5m3+T3q3cfmecgUIZg5b7wVF55mLF9XmCWq+ba4J1aujmyNIR620vBn5YPDh2j
kh/UzvJXDAZ04qTWGUWiCJ3/Iu5OZNN2ICbQOTbBsvWypfsb49Vv1mmlP78dTz47
ugUsQK8Feprh/2j42eLXxoka4+9g6aFEIDv+DPHL97NRMDtRNugi/v8pH8YLST41
vyF5w7sA30ZbOJB8FF/61er5iI842mtJJxEB2U11a1O1c9EYvjcIA8WVHG6aAwH+
RnbI0TiOpD/nCrm/2itKTbwSHK5NQTXB+T7mphGt2SvmH/p8ccEXsQ==
=JtBA
-----END PGP SIGNATURE-----


----------------------------------------------------------------------------
----------------------
Dennis Putnam                   Public Key can be obtained from:
Loganville, Ga.                 <http://www.geocities.com/Heartland/Estates/8573>

Reply via email to