Hi,
I have an Iomega Ditto Max Pro and now I'm trying to install on Redhat
5.2 with kernel 2.2.0.
I'm using this script to install
/sbin/insmod ./ftape.o ft_fdc_driver=ftape-internal,none,none,none
ft_tracings=3,3,3,3,3
/sbin/insmod ./zftape.o ft_major_device_number=27
/sbin/insmod ./ftape-internal.o ft_fdc_fc10=0 ft_fdc_mach2=0
ft_fdc_base=0x0210 ft_fdc_dma=0 ft_fdc_threshold=15
ft_fdc_rate_limit=2000
And everything i get when i try to use my ditto max is
Mar 18 12:42:05 server kernel: [011] 0 ftape-ctl.c
(ftape_log_vendor_id) - tape drive type: Iomega DITTO MAX.
Mar 18 12:42:07 server kernel: [012] 0 ftape-io.c
(ftape_report_configuration) - TR-3 tape detected.
Mar 18 12:42:07 server kernel: [013] 0 ftape-ctl.c (ftape_init_drive)
- post QIC-117B drive @ 2000 Kbps.
Mar 18 12:42:07 server kernel: [014] 0 ftape-ctl.c
(ftape_calibrate_data_rate_R20424b34) - Highest FDC supported data rate:
2000 Kbps.
Mar 18 12:42:09 server kernel: [015] 0 ftape-io.c
(ftape_report_configuration) - TR-3 tape detected.
Mar 18 12:42:09 server kernel: [016] 0 ftape-ctl.c (ftape_init_drive)
- unknown length QIC-3020 tape.
Mar 18 12:42:35 server kernel: [017] 0 ftape-io.c
(ftape_increase_threshold) - New FIFO threshold: 16.
Mar 18 12:42:35 server kernel: [018] 0 ftape-rw.c
(ftape_start_tape) - increased threshold because of excessive overrun
errors.
Mar 18 12:42:52 server kernel: [019] 0 ftape-io.c
(ftape_increase_threshold) - cannot increase fifo threshold.
Mar 18 12:42:54 server kernel: [020] 0 ftape-io.c
(ftape_report_error_R64fbb47c) - errorcode: 31.
Mar 18 12:42:55 server kernel: [021] 0 ftape-io.c
(ftape_report_configuration) - TR-3 tape detected.
Mar 18 12:42:55 server kernel: [022] 0 ftape-io.c
(ftape_set_data_rate) - Rate change failed!.
Mar 18 12:43:11 server kernel: [023] 0 ftape-io.c
(ftape_increase_threshold) - cannot increase fifo threshold.
Mar 18 12:43:12 server kernel: [024] 0 ftape-io.c
(ftape_report_error_R64fbb47c) - errorcode: 31.
.
.
.
