I also have the problem of "Device Not Configured"
Can you explain what you mean by your suggestions below?
I don't know how to "configure correctly"
I don't know how to determine if other modules are claiming resources.
thanks in advance.
---------- Forwarded Message ----------
Subject: Re: "device not configured" ????
Date: Fri, 16 Jul 1999 23:26:20 +0200
From: Juergen Leising <[EMAIL PROTECTED]>
On Fri, Jul 16, 1999 at 11:02:52AM +0200, Julien Michielsen wrote:
> After installing ftape (4.x-1999_06_30) I made a first try with
> # mt status -f /dev/nrft0 .
> Only to end up with the message "device not configured". Wat may
> have gone wrong here?
>
Several things are possible...
- have you loaded (successfully) all the three modules?
- have you configured them correctly?
- is any of the resources claimed by a different module (lp for instance)
To find out,
- do a lsmod
- have a look at /etc/conf.modules
- have a look at /var/log/messages
and tell us the results...and of course what kind of drive you have
and which kernel and kind of distribution and and and...
Bye, Juergen.
--
*****************************************************************
* Juergen Leising, E-Mail: [EMAIL PROTECTED] *
* http://www.stud.uni-bayreuth.de/~a0037/ *
*****************************************************************
--
Steve Fox
[EMAIL PROTECTED]
