clint wrote:
>
> I have 4.03 experimental running fine. Kernel 2.2.5. But,.....
>
> When I run backups I get:
>
> /dev/qft0: Device not configured
>
> Log shows:
>
> ... No FDC found
> .... no drive polling interrupt!
> ... fdc not ready
> .... fdc_init_one(fdc) failed: -6
>
> Floppy drive works, tape drive works under DOS. Tape drive connected to FDC-
> not
> a separate controller.
Check your setting for the floppy controller under Windows. Probably
0x3f0, IRQ 6, and DMA 2. When you insmod the ftape-internal.o modules
(you ARE running the latest version of the drivers and not the kernel
version, right?), force the setting with "ft_fdc_base=0x3f0 ft_fdc_irq=6
ft_fdc_dma=2."
--
Tim Jones [EMAIL PROTECTED]
Vice President Visit our tape backup web pages:
Enhanced Software Technologies, Inc. http://www.estinc.com/
