Hallo.
I�ve got a Ditto-2GB parport ,laterest unstable ftape version and kernel
v2.2.12 . the bpck-fdc find my tape but if I want to write on it it get
a error "Operation not supported by device" and in /var/log/messages the
driver writes:
Sep 4 13:47:25 SAMSUNG kernel: [015] fdc-io.c (fdc_register) -
Probing for b
pck-fdc tape drive slot
1. Sep 4 13:47:25
SAMSUNG kernel: [016] 1 fdc-parport.h (ft_parport_probe) - dev:
c08be7a0.
Sep 4 13:47:25 SAMSUNG kernel: [017] 1 fdc-parport.h
(ft_parport_probe) - irq:
6.
Sep 4 13:47:25 SAMSUNG kernel: [018] 1 fdc-parport.h
(ft_parport_probe) - port
:
378.
Sep 4 13:47:25 SAMSUNG kernel: [019] 1 bpck-fdc.c (bpck_fdc_probe) -
Bpck par
allel port tape drive interface for ftape v4.03-pre-4
06/30/99. Sep 4 13:47:25 SAMSUNG kernel: [020]
bpck-fdc.c (bpck_fdc_switch_proto) - N
eed delay 1 for proto 0.
Sep 4 13:47:25 SAMSUNG kernel: [021] bpck-fdc.c
(bpck_fdc_switch_proto) - Need delay 1 for proto 0.
Sep 4 13:47:25 SAMSUNG kernel: [022] bpck-fdc.c
(bpck_fdc_log_adapter) - bpck floppy tape at 0x378, mode 0 (4-bit),
delay 1.
Sep 4 13:47:25 SAMSUNG kernel: [023] 1 fdc-parport.h
(ft_parport_probe) - base: 0x378, irq: 6, number: 0.
Sep 4 13:47:25 SAMSUNG kernel: [024] 1 ftape-buffer.c (add_one_buffer)
- buffer nr #1 @ c08e12c0, dma area @ c30ad000.
Sep 4 13:47:25 SAMSUNG kernel: [025] 1 ftape-buffer.c (add_one_buffer)
- buffer nr #2 @ c08e19a0, dma area @ c30ad000.
Sep 4 13:47:25 SAMSUNG kernel: [026] 1 ftape-buffer.c (add_one_buffer)
- buffer nr #3 @ c08e14a0, dma area @ c30ad000.
Sep 4 13:47:25 SAMSUNG kernel: [027] 1 ftape-buffer.c (add_one_buffer)
- buffer nr #4 @ c08e1220, dma area @ c30ad000.
Sep 4 13:47:49 SAMSUNG kernel: parport0: no IEEE-1284 device present.
Sep 4 13:48:23 SAMSUNG kernel: [028] 1 ftape-calibr.c
(ftape_calibrate) - calibr_count: 452, calibr_time: 9955 us.
Sep 4 13:48:23 SAMSUNG kernel: [029] 1 ftape-calibr.c
(ftape_calibrate) - TC for `fdc_wait()' = 22024 nsec (at 452 counts).
Sep 4 13:48:24 SAMSUNG kernel: [030] 1 fdc-io.c (fdc_reset) - no
drive polling interrupt!.
Sep 4 13:48:24 SAMSUNG kernel: [031] 1 fdc-io.c (fdc_probe) - Type
82077AA FDC found.
Sep 4 13:48:25 SAMSUNG kernel: [032] 1 fdc-io.c (fdc_reset) - no
drive polling interrupt!.
Sep 4 13:48:56 SAMSUNG kernel: [033] 1 ftape-ctl.c
(ftape_activate_drive) - No tape drive found.
Sep 4 13:48:58 SAMSUNG kernel: [034] 1 fdc-io.c (fdc_reset) - no
drive polling interrupt!.
Sep 4 13:48:58 SAMSUNG kernel: [035] 1 ftape-ctl.c (ftape_enable) -
ftape_activate_drive(ftape, &ftape->drive_type) failed: -19.
Sep 4 13:48:58 SAMSUNG kernel: [036] 1 zftape-ctl.c (_zft_open) -
ftape_enable(sel) failed: -19.
Sep 4 13:48:58 SAMSUNG kernel: [037] 1 zftape-init.c (zft_open) -
_zft_open failed.
What going on?
Jens Reimann
[EMAIL PROTECTED]
