Hi all. This is my first day on the listserv. I am sure you've already discussed the ditto max pro, but I would appreciate your insight. After installing redhat61, I upgraded to ftape 4.03prerelease2. (thanks to http://www.csd.uu.se/~mikpe/linux/ftape/) Now, I have tried repeatedly to modify my MCONFIG, remake the source, and load the following modules: parport parport_pc io=0x378 irq=7 dma=3 ftape bpck-fdc The best results I've seen in dmesg show: parport0: PC-style at 0x378, irq 7, dma 3 [SPP,EPP] ftape v4.03-pre-2 11/05/98 (c) 1993-1996 Bas Laarhoven (c) 1995-1996 Kai Harrekilde-Petersen (c) 1996-1998 Claus-Justus Heine ([EMAIL PROTECTED]) QIC-117 driver for QIC-40/80/3010/3020/Ditto 2GB/MAX floppy tape drives. Compiled for Linux version 2.2.12-20 installing QIC-117 floppy tape hardware drive ... ftape_init @ 0xc281421c. bpck-fdc.c: bpck_fdc_register @ 0xc2840af0 [000] fdc-io.c (fdc_register) - Probing for bpck-fdc tape drive slot 0. [001] 0 fdc-parport.h (ft_parport_probe) - dev: c125d260. [002] 0 fdc-parport.h (ft_parport_probe) - irq: 7. [003] 0 fdc-parport.h (ft_parport_probe) - port: 378. [004] 0 bpck-fdc.c (bpck_fdc_probe) - Bpck parallel port tape drive interface for ftape v4.03-pre-2 11/05/98. [005] bpck-fdc.c (bpck_fdc_switch_proto) - Need delay 1 for proto 0. [006] bpck-fdc.c (bpck_fdc_log_adapter) - bpck floppy tape at 0x378, mode 4 (EPP-32), delay 0. [007] 0 fdc-parport.h (ft_parport_probe) - base: 0x378, irq: 7, number: 0. [008] 0 ftape-buffer.c (add_one_buffer) - buffer nr #1 @ c1574370, dma area @ c2844000. [009] 0 ftape-buffer.c (add_one_buffer) - buffer nr #2 @ c1574400, dma area @ c2844000. [010] 0 ftape-buffer.c (add_one_buffer) - buffer nr #3 @ c1574490, dma area @ c2844000. [011] 0 ftape-buffer.c (add_one_buffer) - buffer nr #4 @ c1574520, dma area @ c2844000. At this point, I would hope to find a working /dev/qft0. No luck. Thanks in advance for your help.
