Michael,
I've left the details out, but that looks like a bad drive. The error
that you are seeing can occur when the sensor switch is stuck in the "WP"
position. This is a factory repair item.
Now, if you're able to use the device under Windows (I forget ....), you
may wish to play around with your IRQ, DMA, and I/O Port settings. With
my Iomega and Seagate TR-3 drives, I set the accellerator card to
IO=0x370, IRQ=6, and DMA=2. The DMA and IRQ are shared with the onboard
floppy controller. This works every time I've used it (even in old slow
systems).
--
Tim Jones [EMAIL PROTECTED]
Vice President http://www.estinc.com/
Enhanced Software Technologies, Inc. (602) 470-1115
"The BRU Guys"
