Hi!
I'm running ftape-4.03-pre4 on Linux 2.2.14.
Everytime I want to use taper-6.9b for backups, I get "ftape-io.c
(ftape_report_error) - errorcode: 39." while closing tape.
cat /proc/ftape/0/*:
cartridge:
segments : 304
tracks : 40
length : 417ft
formatted : yes
writable : yes
QIC spec. : QIC-3010
fmt-code : 4
controller:
FDC_driver: ftape-internal -- driver for internal FDC controllers
(FC-10/FC-20/82078/Ditto EZ)
FDC type : i82077AA
FDC base : 0x3f0
FDC irq : 6
FDC dma : 2
FDC thr. : 8
max. rate : 1000 kbit/sec
rate limit: 4000 kbit/sec
used rate : 1000 kbit/sec
tapedrive:
vendor id : 0x8881
drive name: Iomega 700
wind speed: 80 ips
wakeup : Colorado
max. rate : 1000 kbit/sec
used rate : 1000 kbit/sec
Does anybody else use Taper with a Iomega Tape 700? If so, what settings
do I have to change?
Manfred
--
PGP available at Public Key Servers or by mail (Subject "Send PGP-Key")
* RSA: 0xC05BC0F5 * 6EC4 41CC 379B 3B5B 1393 F5EB 3AAF 77B7 *
* DSS: 0x4613B5CA * 628D 611B 49DF 754C 6B3C A7B5 63AD 6C8A 4613 B5CA *
* ICQ: 61597169 *
