Hello all. 

Now trying to get ftape to work with Trakker on a 
Toshiba Sattelite (notebook, CPU=486sx, ram=8M, HD=1G, running Debian Potato 
w/ 2.2.17 kernel). Basically, I am trying this route after having
unsuccessfully wrestled with the Aptiva's two parallel ports (re report 
from last month). 

I have compiled the kernel without FTAPE support, and with parport,
parport_pc, parport_probe, lp and ppa. 

I was able to change BIOS so that printer port 
is bi-directional (=SPP?; all the was available - 
couldn't stipulate the irq). 

My questions/problems: 

* parport gets loaded automatically, together with parport_probe. Not 
sure how that happens. This kernel uses /etc/modules.conf and aks 
the user to delete conf.modules (I did). But parport_probe is not 
mentioned in this file. Earlier kernel on Debian used /etc/rc.d/rc.local, 
I think, but this kernel doesn't have such a file (/etc/rcx.d/xxx)
Does anyone know where the system is getting the command to load 
parport_probe? It is not a big problem, but I have to rmmod this 
module each time I try to load ftape (ftape can only be loaded 
after parport_pc, apparently) and would rather not have to. 

* When parport_pc gets loaded, the hardward is recognized but 
not the irq. echo 7 > /proc/parport/irq goes without a problem. 
I have confirmed that lp and ppa work (the Iomega can be accessed 
without any problem at all) but ftape, while it does get "registered" 
still cannot be accessed, apparently not finding the irq...
I uncommented the Trakker lines in MCONFIG like so:  

# For a HP Colorado Trakker parallel port drive, try
#
TRAKKER_DEV=0
FDC_OPT +=     -DCONFIG_FT_FDC_PARPORT_$(TRAKKER_DEV)=-1 \
                -DCONFIG_FT_PAR_$(TRAKKER_DEV)=1 \
                -DCONFIG_FT_TRAKKER_$(TRAKKER_DEV)=1


but didn't touch anything else. Do I need to do something to get this to go? 
It seems apparent that my problem is not with the port but with 
my Ftape configuration. Or, could be I am just unlucky with 
the kernel I have chosen?  

* The Ftape manuals talk about ftmt but I can only find mt. I 
assume that these are equivalent and work with the same commands... 

Thanks!

Tony Laszlo
Tokyo




Aug  1 13:13:53 satellite kernel: ppa: Version 2.03 (for Linux 2.2.x)
Aug  1 13:13:53 satellite kernel: ppa: Found device at ID 6, Attempting to use EPP 32 
bit
Aug  1 13:13:53 satellite kernel: ppa: Found device at ID 6, Attempting to use SPP
Aug  1 13:13:53 satellite kernel: ppa: Communication established with ID 6 using SPP
Aug  1 13:13:53 satellite kernel: scsi0 : Iomega VPI0 (ppa) interface
Aug  1 13:13:53 satellite kernel: scsi : 1 host.
Aug  1 13:13:53 satellite kernel:   Vendor: IOMEGA    Model: ZIP 100           Rev: 
J.03
Aug  1 13:13:53 satellite kernel:   Type:   Direct-Access                      ANSI 
SCSI revision: 02
Aug  1 13:13:53 satellite kernel: Detected scsi removable disk sda at scsi0, channel 
0, id 6, lun 0
Aug  1 13:13:53 satellite kernel: SCSI device sda: hdwr sector= 512 bytes. Sectors= 
196608 [96 MB] [0.1 GB]
Aug  1 13:13:53 satellite kernel: sda: Write Protect is off
Aug  1 13:13:53 satellite kernel:  sda: sda4

Aug  1 14:50:28 satellite kernel: ftape v4.03-pre-4 06/30/99
Aug  1 14:50:28 satellite kernel: 
Aug  1 14:50:28 satellite kernel: QIC-117 driver for QIC-40/80/3010/3020/Ditto 2GB/MAX 
floppy tape drives.
Aug  1 14:50:28 satellite kernel: Compiled for Linux version 2.2.17
Aug  1 14:50:42 satellite kernel: trakker.c: trakker_register @ 0xc100e040
Aug  1 14:50:42 satellite kernel: [002]    fdc-io.c (fdc_register_R21fc4ea6) - Probing 
for trakker tape drive slot 0.
Aug  1 14:50:42 satellite kernel: [003] 0  fdc-parport.h (ft_parport_probe) - dev: 
c0085cc0.
Aug  1 14:50:42 satellite kernel: [004] 0  fdc-parport.h (ft_parport_probe) - irq: 7.
Aug  1 14:50:42 satellite kernel: [005] 0  fdc-parport.h (ft_parport_probe) - port: 
378.
Aug  1 14:50:42 satellite kernel: [006] 0    trakker.c (trakker_checksum) - checksum 
error (off by 9c).
Aug  1 14:50:42 satellite kernel: [007] 0  fdc-parport.h (ft_parport_probe) - can't 
find parport interface for ftape id 0.
Aug  1 14:50:42 satellite kernel: [008] 0 trakker.c (trakker_detect) - can't find 
trakker interface for ftape id 0.
Aug  1 14:50:42 satellite kernel: [009] 0 trakker.c (trakker_detect) - 
ft_parport_probe(fdc, &trakker->parinfo) failed: -6.
Aug  1 14:50:42 satellite kernel: [010]    fdc-io.c (fdc_register_R21fc4ea6) - Probing 
for trakker tape drive slot 1.
Aug  1 14:50:42 satellite kernel: [011] 1  fdc-parport.h (ft_parport_probe) - dev: 
c0085cc0.
Aug  1 14:50:42 satellite kernel: [012] 1  fdc-parport.h (ft_parport_probe) - irq: 7.
Aug  1 14:50:42 satellite kernel: [013] 1  fdc-parport.h (ft_parport_probe) - port: 
378.
Aug  1 14:50:42 satellite kernel: [014] 1    trakker.c (trakker_checksum) - checksum 
error (off by 9c).
Aug  1 14:50:42 satellite kernel: [015] 1  fdc-parport.h (ft_parport_probe) - can't 
find parport interface for ftape id 1.
Aug  1 14:50:42 satellite kernel: [016] 1 trakker.c (trakker_detect) - can't find 
trakker interface for ftape id 1.
Aug  1 14:50:42 satellite kernel: [017] 1 trakker.c (trakker_detect) - 
ft_parport_probe(fdc, &trakker->parinfo) failed: -6.
Aug  1 14:50:42 satellite kernel: [018]    fdc-io.c (fdc_register_R21fc4ea6) - Probing 
for trakker tape drive slot 2.
Aug  1 14:50:42 satellite kernel: [019] 2  fdc-parport.h (ft_parport_probe) - dev: 
c0085cc0.
Aug  1 14:50:42 satellite kernel: [020] 2  fdc-parport.h (ft_parport_probe) - irq: 7.
Aug  1 14:50:42 satellite kernel: [021] 2  fdc-parport.h (ft_parport_probe) - port: 
378.
Aug  1 14:50:42 satellite kernel: [022] 2    trakker.c (trakker_checksum) - checksum 
error (off by 9c).
Aug  1 14:50:42 satellite kernel: [023] 2  fdc-parport.h (ft_parport_probe) - can't 
find parport interface for ftape id 2.
Aug  1 14:50:42 satellite kernel: [024] 2 trakker.c (trakker_detect) - can't find 
trakker interface for ftape id 2.
Aug  1 14:50:42 satellite kernel: [025] 2 trakker.c (trakker_detect) - 
ft_parport_probe(fdc, &trakker->parinfo) failed: -6.
Aug  1 14:50:42 satellite kernel: [026]    fdc-io.c (fdc_register_R21fc4ea6) - Probing 
for trakker tape drive slot 3.
Aug  1 14:50:42 satellite kernel: [027] 3  fdc-parport.h (ft_parport_probe) - dev: 
c0085cc0.
Aug  1 14:50:42 satellite kernel: [028] 3  fdc-parport.h (ft_parport_probe) - irq: 7.
Aug  1 14:50:42 satellite kernel: [029] 3  fdc-parport.h (ft_parport_probe) - port: 
378.
Aug  1 14:50:42 satellite kernel: [030] 3    trakker.c (trakker_checksum) - checksum 
error (off by 9c).
Aug  1 14:50:42 satellite kernel: [031] 3  fdc-parport.h (ft_parport_probe) - can't 
find parport interface for ftape id 3.
Aug  1 14:50:42 satellite kernel: [032] 3 trakker.c (trakker_detect) - can't find 
trakker interface for ftape id 3.
Aug  1 14:50:42 satellite kernel: [033] 3 trakker.c (trakker_detect) - 
ft_parport_probe(fdc, &trakker->parinfo) failed: -6.
Aug  1 14:59:55 satellite kernel: trakker successfully unloaded.



Reply via email to