Could anyone review this issue?

Thanks
Wei.

-----Original Message-----
From: Wei Ni 
Sent: Monday, March 28, 2011 6:37 PM
To: [email protected]; [email protected]; 
[email protected]
Cc: [email protected]; Wei Ni
Subject: [PATCH v9] mfd: tps6586x: add RTC driver for TI TPS6586x

From: Wei Ni <[email protected]>

this driver supports setting of alarms, and
reading/setting of time

Signed-off-by: Wei Ni <[email protected]>
---
v9: check the enable_irq_wake/disable_irq_wake return value.
fix these two function's fisrt paremeter, it should use "&pdev->dev"

 drivers/rtc/rtc-tps6586x.c |   18 ++++++++++++++----
 1 files changed, 14 insertions(+), 4 deletions(-)

diff --git a/drivers/rtc/rtc-tps6586x.c b/drivers/rtc/rtc-tps6586x.c
index b891899..a3944a5 100644
--- a/drivers/rtc/rtc-tps6586x.c
+++ b/drivers/rtc/rtc-tps6586x.c
@@ -335,19 +335,29 @@ static int __devexit tps6586x_rtc_remove(struct 
platform_device *pdev)
 static int tps6586x_rtc_suspend(struct platform_device *pdev,
                                pm_message_t state)
 {
+       int ret;
        struct tps6586x_rtc *rtc = dev_get_drvdata(&pdev->dev);
 
-       if (device_may_wakeup(pdev))
-               enable_irq_wake(rtc->irq);
+       if (device_may_wakeup(&pdev->dev))
+               ret = enable_irq_wake(rtc->irq);
+
+       if (ret)
+               dev_warn(&pdev->dev, "enable irq wakeup failed.\n");
+
        return 0;
 }
 
 static int tps6586x_rtc_resume(struct platform_device *pdev)
 {
+       int ret;
        struct tps6586x_rtc *rtc = dev_get_drvdata(&pdev->dev);
 
-       if (device_may_wakeup(pdev))
-               disable_irq_wake(rtc->irq);
+       if (device_may_wakeup(&pdev->dev))
+               ret = disable_irq_wake(rtc->irq);
+
+       if (ret)
+               dev_warn(&pdev->dev, "disable irq wakeup failed.\n");
+
        return 0;
 }
 
-- 
1.7.0

--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to