Hi, On Wed, Dec 07, 2011 at 03:13:44PM -0700, Stephen Warren wrote: > Seaboard and Ventana share some GPIOs, but others are different. Split the > GPIO table into common, seaboard-specific, and ventana-specific tables, so > that only the correct ones are enabled for each board. Add a few missing > audio-related GPIOs for Ventana. > > Signed-off-by: Stephen Warren <[email protected]> > --- > arch/arm/mach-tegra/board-seaboard-pinmux.c | 16 +++++++++++++++- > 1 files changed, 15 insertions(+), 1 deletions(-) > > diff --git a/arch/arm/mach-tegra/board-seaboard-pinmux.c > b/arch/arm/mach-tegra/board-seaboard-pinmux.c > index b1c2972..cb5b2e9 100644 > --- a/arch/arm/mach-tegra/board-seaboard-pinmux.c > +++ b/arch/arm/mach-tegra/board-seaboard-pinmux.c > @@ -190,14 +190,26 @@ static struct tegra_gpio_table common_gpio_table[] = { > { .gpio = TEGRA_GPIO_SD2_CD, .enable = true }, > { .gpio = TEGRA_GPIO_SD2_WP, .enable = true }, > { .gpio = TEGRA_GPIO_SD2_POWER, .enable = true }, > + { .gpio = TEGRA_GPIO_CDC_IRQ, .enable = true }, > +}; > + > +static struct tegra_gpio_table seaboard_gpio_table[] = { > { .gpio = TEGRA_GPIO_LIDSWITCH, .enable = true }, > { .gpio = TEGRA_GPIO_POWERKEY, .enable = true }, > { .gpio = TEGRA_GPIO_HP_DET, .enable = true }, > { .gpio = TEGRA_GPIO_ISL29018_IRQ, .enable = true }, > - { .gpio = TEGRA_GPIO_CDC_IRQ, .enable = true }, > { .gpio = TEGRA_GPIO_USB1, .enable = true }, > }; > > +static struct tegra_gpio_table ventana_gpio_table[] = { > + /* hp_det */ > + { .gpio = TEGRA_GPIO_PW2, .enable = true }, > + /* int_mic_en */ > + { .gpio = TEGRA_GPIO_PX0, .enable = true }, > + /* ext_mic_en */ > + { .gpio = TEGRA_GPIO_PX1, .enable = true }, > +};
These should be given symbolical names instead. -Olof -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
