Add support for bringing up secondary cores on Tegra30. On Tegra30 secondary CPU cores are powergated, so we need to turn on the domains before we can bring the CPU cores online. Bringing secondary cores online happens early during the ssytem boot, so we call powergating initialization from platform early_init function.
Based on work by: Scott Williams <[email protected]> Colin Cross <[email protected]> Alex Frid <[email protected]> Signed-off-by: Peter De Schrijver <[email protected]> --- arch/arm/mach-tegra/headsmp.S | 32 +++++++++++++++++++++++++ arch/arm/mach-tegra/platsmp.c | 52 ++++++++++++++++++++++++++++++++++++++++- 2 files changed, 83 insertions(+), 1 deletions(-) diff --git a/arch/arm/mach-tegra/headsmp.S b/arch/arm/mach-tegra/headsmp.S index bb13e22..925c4a0 100644 --- a/arch/arm/mach-tegra/headsmp.S +++ b/arch/arm/mach-tegra/headsmp.S @@ -188,6 +188,38 @@ __die: str r1, [r7, #0x340] @ CLK_RST_CPU_CMPLX_SET #endif 1: +#ifdef CONFIG_ARCH_TEGRA_3x_SOC + mov32 r6, TEGRA_FLOW_CTRL_BASE + + cmp r10, #0 + moveq r1, #FLOW_CTRL_HALT_CPU0_EVENTS + moveq r2, #FLOW_CTRL_CPU0_CSR + movne r1, r10, lsl #3 + addne r2, r1, #(FLOW_CTRL_CPU1_CSR-8) + addne r1, r1, #(FLOW_CTRL_HALT_CPU1_EVENTS-8) + + /* Clear CPU "event" and "interrupt" flags and power gate + it when halting but not before it is in the "WFI" state. */ + ldr r0, [r6, +r2] + orr r0, r0, #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG + orr r0, r0, #FLOW_CTRL_CSR_ENABLE + str r0, [r6, +r2] + + /* Unconditionally halt this CPU */ + mov r0, #FLOW_CTRL_WAITEVENT + str r0, [r6, +r1] + ldr r0, [r6, +r1] @ memory barrier + + dsb + isb + wfi @ CPU should be power gated here + + /* If the CPU didn't power gate above just kill it's clock. */ + + mov r0, r11, lsl #8 + str r0, [r7, #348] @ CLK_CPU_CMPLX_SET +#endif + /* If the CPU still isn't dead, just spin here. */ b . ENDPROC(__tegra_cpu_reset_handler) diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c index fa1178d..672a751 100644 --- a/arch/arm/mach-tegra/platsmp.c +++ b/arch/arm/mach-tegra/platsmp.c @@ -24,7 +24,9 @@ #include <asm/mach-types.h> #include <asm/smp_scu.h> +#include <mach/clk.h> #include <mach/iomap.h> +#include <mach/powergate.h> #include "chipid.h" #include "flowctrl.h" @@ -42,6 +44,8 @@ static void __iomem *scu_base = IO_ADDRESS(TEGRA_ARM_PERIF_BASE); (IO_ADDRESS(TEGRA_CLK_RESET_BASE) + 0x340) #define CLK_RST_CONTROLLER_RST_CPU_CMPLX_CLR \ (IO_ADDRESS(TEGRA_CLK_RESET_BASE) + 0x344) +#define CLK_RST_CONTROLLER_CLK_CPU_CMPLX_CLR \ + (IO_ADDRESS(TEGRA_CLK_RESET_BASE) + 0x34c) #define CPU_CLOCK(cpu) (0x1<<(8+cpu)) #define CPU_RESET(cpu) (0x1111ul<<(cpu)) @@ -73,11 +77,54 @@ static int tegra20_power_up_cpu(unsigned int cpu) return 0; } +static int tegra30_power_up_cpu(unsigned int cpu) +{ + u32 reg; + int ret, pwrgateid; + unsigned long timeout; + + pwrgateid = tegra_cpu_powergate_id(cpu); + if (pwrgateid < 0) + return pwrgateid; + + /* If this is the first boot, toggle powergates directly. */ + if (!tegra_powergate_is_powered(pwrgateid)) { + ret = tegra_powergate_power_on(pwrgateid); + if (ret) + return ret; + + /* Wait for the power to come up. */ + timeout = jiffies + 10*HZ; + do { + if (tegra_powergate_is_powered(pwrgateid)) + goto remove_clamps; + udelay(10); + } while (time_before(jiffies, timeout)); + return -ETIMEDOUT; + } + +remove_clamps: + /* CPU partition is powered. Enable the CPU clock. */ + writel(CPU_CLOCK(cpu), CLK_RST_CONTROLLER_CLK_CPU_CMPLX_CLR); + reg = readl(CLK_RST_CONTROLLER_CLK_CPU_CMPLX_CLR); + udelay(10); + + /* Remove I/O clamps. */ + ret = tegra_powergate_remove_clamping(pwrgateid); + udelay(10); + + /* Clear flow controller CSR. */ + flowctrl_write_cpu_csr(cpu, 0); + + return 0; +} + int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) { int status; - /* Force the CPU into reset. The CPU must remain in reset when the + /* + * Force the CPU into reset. The CPU must remain in reset when the * flow controller state is cleared (which will cause the flow * controller to stop driving reset if the CPU has been power-gated * via the flow controller). This will have no effect on first boot @@ -98,6 +145,9 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) case TEGRA20: status = tegra20_power_up_cpu(cpu); break; + case TEGRA30: + status = tegra30_power_up_cpu(cpu); + break; default: status = -EINVAL; break; -- 1.7.7.rc0.72.g4b5ea.dirty -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
