The VIO regulator register specify the voltage configuration on bit3:2 of its register. And hence only these bits should be modified when setting voltage and used when reading voltage from register setting.
Signed-off-by: Laxman Dewangan <[email protected]> --- drivers/regulator/tps65910-regulator.c | 7 +++++-- 1 files changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/regulator/tps65910-regulator.c b/drivers/regulator/tps65910-regulator.c index 9092b7f..a9bb6d4 100644 --- a/drivers/regulator/tps65910-regulator.c +++ b/drivers/regulator/tps65910-regulator.c @@ -674,8 +674,9 @@ static int tps65911_get_voltage(struct regulator_dev *dev) step_mv = 100; break; case TPS65910_REG_VIO: + value &= LDO_SEL_MASK; + value >>= LDO_SEL_SHIFT; return pmic->info[id]->voltage_table[value] * 1000; - break; default: return -EINVAL; } @@ -767,9 +768,11 @@ static int tps65911_set_voltage(struct regulator_dev *dev, unsigned selector) case TPS65911_REG_LDO6: case TPS65911_REG_LDO7: case TPS65911_REG_LDO8: - case TPS65910_REG_VIO: return tps65910_modify_bits(pmic, reg, (selector << LDO_SEL_SHIFT), LDO3_SEL_MASK); + case TPS65910_REG_VIO: + return tps65910_modify_bits(pmic, reg, + (selector << LDO_SEL_SHIFT), LDO_SEL_MASK); } return -EINVAL; -- 1.7.1.1 -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
