From: Stephen Warren <[email protected]> The I2C2 controller can be routed to either pingroup DDC or PTA. Seaboard actually uses this as an I2C bus mux, and devices are connected to both pingroups. This change statically assigns the I2C2 controller to pingroup PTA, so that on-board devices can be accessed. The DDC pingroup is used for EDID/DDC accesses which are not yet required, given the absence of any Tegra graphics support. I2C muxing will be supported later.
Signed-off-by: Stephen Warren <[email protected]> --- arch/arm/boot/dts/tegra-seaboard.dts | 6 +++++- 1 files changed, 5 insertions(+), 1 deletions(-) diff --git a/arch/arm/boot/dts/tegra-seaboard.dts b/arch/arm/boot/dts/tegra-seaboard.dts index 96516fb..19db40a 100644 --- a/arch/arm/boot/dts/tegra-seaboard.dts +++ b/arch/arm/boot/dts/tegra-seaboard.dts @@ -100,7 +100,7 @@ }; hdint { nvidia,pins = "hdint", "lpw0", "lpw2", "lsc1", - "lsck", "lsda", "pta"; + "lsck", "lsda"; nvidia,function = "hdmi"; }; i2cp { @@ -134,6 +134,10 @@ nvidia,pins = "pmc"; nvidia,function = "pwr_on"; }; + pta { + nvidia,pins = "pta"; + nvidia,function = "i2c2"; + }; rm { nvidia,pins = "rm"; nvidia,function = "i2c1"; -- 1.7.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
