On Tuesday 26 June 2012 18:31:00 Stephen Warren wrote: > From: Stephen Warren <[email protected]> > > The Toshiba AC100/PAZ00 uses a TPS6586x regulator. Instantiate this. > > [...] > > Cc: Marc Dietrich <[email protected]> > Signed-off-by: Stephen Warren <[email protected]>
I tested this on paz00 using linux-next and found no issues, so feel free to add ... Tested-By: Marc Dietrich <[email protected]> > --- > v2: > * Made all constraints specify a single voltage rather than different > min/max, per description above. > * Removed vin-supply properties from LDO nodes; the driver and binding > need to be updated to support specifying the parent regulators before > we can put these into DT. > --- > arch/arm/boot/dts/tegra20-paz00.dts | 130 > +++++++++++++++++++++++++++++++++++ 1 files changed, 130 insertions(+), 0 > deletions(-) > > diff --git a/arch/arm/boot/dts/tegra20-paz00.dts > b/arch/arm/boot/dts/tegra20-paz00.dts index 684a9e1..dccc8b4 100644 > --- a/arch/arm/boot/dts/tegra20-paz00.dts > +++ b/arch/arm/boot/dts/tegra20-paz00.dts > @@ -272,12 +272,142 @@ > status = "okay"; > clock-frequency = <400000>; > > + pmic: tps6586x@34 { > + compatible = "ti,tps6586x"; > + reg = <0x34>; > + interrupts = <0 86 0x4>; > + > + #gpio-cells = <2>; > + gpio-controller; > + > + regulators { > + #address-cells = <1>; > + #size-cells = <0>; > + > + regulator@0 { > + reg = <0>; > + regulator-compatible = "sm0"; > + regulator-name = "+1.2vs_sm0"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-always-on; > + }; > + > + regulator@1 { > + reg = <1>; > + regulator-compatible = "sm1"; > + regulator-name = "+1.0vs_sm1"; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1000000>; > + regulator-always-on; > + }; > + > + regulator@2 { > + reg = <2>; > + regulator-compatible = "sm2"; > + regulator-name = "+3.7vs_sm2"; > + regulator-min-microvolt = <3700000>; > + regulator-max-microvolt = <3700000>; > + regulator-always-on; > + }; > + > + regulator@3 { > + reg = <3>; > + regulator-compatible = "ldo0"; > + regulator-name = "+3.3vs_ldo0"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + }; > + > + regulator@4 { > + reg = <4>; > + regulator-compatible = "ldo1"; > + regulator-name = "+1.1vs_ldo1"; > + regulator-min-microvolt = <1100000>; > + regulator-max-microvolt = <1100000>; > + regulator-always-on; > + }; > + > + regulator@5 { > + reg = <5>; > + regulator-compatible = "ldo2"; > + regulator-name = "+1.2vs_ldo2"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + }; > + > + regulator@6 { > + reg = <6>; > + regulator-compatible = "ldo3"; > + regulator-name = "+3.3vs_ldo3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + regulator@7 { > + reg = <7>; > + regulator-compatible = "ldo4"; > + regulator-name = "+1.8vs_ldo4"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + }; > + > + regulator@8 { > + reg = <8>; > + regulator-compatible = "ldo5"; > + regulator-name = "+2.85vs_ldo5"; > + regulator-min-microvolt = <2850000>; > + regulator-max-microvolt = <2850000>; > + regulator-always-on; > + }; > + > + regulator@9 { > + reg = <9>; > + regulator-compatible = "ldo6"; > + regulator-name = "+2.85vs_ldo6"; > + regulator-min-microvolt = <2850000>; > + regulator-max-microvolt = <2850000>; > + }; > + > + regulator@10 { > + reg = <10>; > + regulator-compatible = "ldo7"; > + regulator-name = "+3.3vs_ldo7"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + }; > + > + regulator@11 { > + reg = <11>; > + regulator-compatible = "ldo8"; > + regulator-name = "+1.8vs_ldo8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + regulator@12 { > + reg = <12>; > + regulator-compatible = "ldo9"; > + regulator-name = "+2.85vs_ldo9"; > + regulator-min-microvolt = <2850000>; > + regulator-max-microvolt = <2850000>; > + regulator-always-on; > + }; > + }; > + }; > + > adt7461@4c { > compatible = "adi,adt7461"; > reg = <0x4c>; > }; > }; > > + pmc { > + nvidia,invert-interrupt; > + }; > + > usb@c5000000 { > status = "okay"; > }; -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
