This adds wlan pinmux and gpio settings to the Tegra20 Ventana device tree.
Signed-off-by: Wei Ni <[email protected]> --- arch/arm/boot/dts/tegra20-ventana.dts | 20 ++++++++++++++++++-- 1 files changed, 18 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts index be90544..42dbacc 100644 --- a/arch/arm/boot/dts/tegra20-ventana.dts +++ b/arch/arm/boot/dts/tegra20-ventana.dts @@ -198,7 +198,8 @@ nvidia,tristate = <1>; }; conf_dta { - nvidia,pins = "dta", "dtb", "dtc", "dtd"; + nvidia,pins = "dta", "dtb", "dtc", "dtd", + "kbcb"; nvidia,pull = <1>; nvidia,tristate = <0>; }; @@ -213,7 +214,7 @@ nvidia,tristate = <1>; }; conf_kbca { - nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd", + nvidia,pins = "kbca", "kbcc", "kbcd", "kbce", "kbcf", "sdio1", "uaa", "uab"; nvidia,pull = <2>; nvidia,tristate = <0>; @@ -237,6 +238,16 @@ "ld23_22"; nvidia,pull = <1>; }; + drive_sdio1 { + nvidia,pins = "drive_sdio1"; + nvidia,high-speed-mode = <0>; + nvidia,schmitt = <1>; + nvidia,low-power-mode = <3>; + nvidia,pull-down-strength = <31>; + nvidia,pull-up-strength = <31>; + nvidia,slew-rate-rising = <3>; + nvidia,slew-rate-falling = <3>; + }; }; }; @@ -304,6 +315,11 @@ status = "okay"; }; + sdhci@c8000000 { + status = "okay"; + power-gpios = <&gpio 86 0>; /* gpio PK6 */ + }; + sdhci@c8000400 { status = "okay"; cd-gpios = <&gpio 69 0>; /* gpio PI5 */ -- 1.7.1 -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
