On Friday 03 August 2012 11:39 PM, Stephen Warren wrote:
From: Stephen Warren<[email protected]>
Ventana uses a TPS6586x regulator. Instantiate this, and hook up a
couple of fixed GPIO-controlled regulators too.
The data was chosen to match the PMIC HW defaults, with the following
exception:
ldo6: The HW default is 2.85v. The schematics are unlabelled. Internal
research indicates that 1.8v is correct. Our downstream kernel also uses
1.8v.
Portions based on work by Laxman Dewangan<[email protected]>
Signed-off-by: Stephen Warren<[email protected]>
---
v3:
* Switch back to simple-bus compatible value for the /regulators node.
* Added supply properties for all TPS6586x regulators.
* Made SM* children of the new SYS regulator.
* Removed ldo0 configuration, since it isn't used.
v2:
* Made all constraints match the HW defaults to avoid behavior changes,
with exceptions noted above.
* Removed vin-supply properties from LDO nodes; the driver and binding
need to be updated to support specifying the parent regulators before
we can put these into DT.
* Rename vdd_pnl regulator-name to match schematic.
* Added vdd_bl regulator.
* Fix typo in regulator@3 reg property.
* Use the enumerated-bus compatible value for the /regulators node.
* Enhanced all regulator-name properties to list all signal names directly
derived from the regulator pins.
* Added ldo_rtc regulator.
---
Acked-by: Laxman Dewangan <[email protected]>
You can addd my ACK for harmony dts file.
arch/arm/boot/dts/tegra20-ventana.dts | 204 +++++++++++++++++++++++++++++++++
1 files changed, 204 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/tegra20-ventana.dts
b/arch/arm/boot/dts/tegra20-ventana.dts
index be90544..4ec6b4c 100644
--- a/arch/arm/boot/dts/tegra20-ventana.dts
+++ b/arch/arm/boot/dts/tegra20-ventana.dts
@@ -289,6 +289,156 @@
i2c@7000d000 {
status = "okay";
clock-frequency =<400000>;
+
+ pmic: tps6586x@34 {
+ compatible = "ti,tps6586x";
+ reg =<0x34>;
+ interrupts =<0 86 0x4>;
Should we say interrupt-controller also here?
+
+ sys-supply =<&vdd_5v0_reg>;
+ vin-sm0-supply =<&sys_reg>;
+ vin-sm1-supply =<&sys_reg>;
+ vin-sm2-supply =<&sys_reg>;
This depends on two changes on tps6586x regulator which are not merged yet.
+
+ pmc {
Should say status OK?
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
