The flow controller can help CPU to go into suspend mode (powered-down state). When CPU go into powered-down state, it needs some careful settings before getting into and after leaving. The enter and exit functions do that by configuring appropriate mode for flow controller.
Signed-off-by: Joseph Lo <[email protected]> --- arch/arm/mach-tegra/flowctrl.c | 38 +++++++++++++++++++++++++++++++++----- arch/arm/mach-tegra/flowctrl.h | 4 ++++ 2 files changed, 37 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-tegra/flowctrl.c b/arch/arm/mach-tegra/flowctrl.c index a2250dd..9c44788 100644 --- a/arch/arm/mach-tegra/flowctrl.c +++ b/arch/arm/mach-tegra/flowctrl.c @@ -25,6 +25,7 @@ #include "flowctrl.h" #include "iomap.h" +#include "fuse.h" u8 flowctrl_offset_halt_cpu[] = { FLOW_CTRL_HALT_CPU0_EVENTS, @@ -75,11 +76,26 @@ void flowctrl_cpu_suspend_enter(unsigned int cpuid) int i; reg = flowctrl_read_cpu_csr(cpuid); - reg &= ~TEGRA30_FLOW_CTRL_CSR_WFE_BITMAP; /* clear wfe bitmap */ - reg &= ~TEGRA30_FLOW_CTRL_CSR_WFI_BITMAP; /* clear wfi bitmap */ + switch (tegra_chip_id) { + case TEGRA20: + /* clear wfe bitmap */ + reg &= ~TEGRA20_FLOW_CTRL_CSR_WFE_BITMAP; + /* clear wfi bitmap */ + reg &= ~TEGRA20_FLOW_CTRL_CSR_WFI_BITMAP; + /* pwr gating on wfe */ + reg |= TEGRA20_FLOW_CTRL_CSR_WFE_CPU0 << cpuid; + break; + case TEGRA30: + /* clear wfe bitmap */ + reg &= ~TEGRA30_FLOW_CTRL_CSR_WFE_BITMAP; + /* clear wfi bitmap */ + reg &= ~TEGRA30_FLOW_CTRL_CSR_WFI_BITMAP; + /* pwr gating on wfi */ + reg |= TEGRA30_FLOW_CTRL_CSR_WFI_CPU0 << cpuid; + break; + } reg |= FLOW_CTRL_CSR_INTR_FLAG; /* clear intr flag */ reg |= FLOW_CTRL_CSR_EVENT_FLAG; /* clear event flag */ - reg |= TEGRA30_FLOW_CTRL_CSR_WFI_CPU0 << cpuid; /* pwr gating on wfi */ reg |= FLOW_CTRL_CSR_ENABLE; /* pwr gating */ flowctrl_write_cpu_csr(cpuid, reg); @@ -99,8 +115,20 @@ void flowctrl_cpu_suspend_exit(unsigned int cpuid) /* Disable powergating via flow controller for CPU0 */ reg = flowctrl_read_cpu_csr(cpuid); - reg &= ~TEGRA30_FLOW_CTRL_CSR_WFE_BITMAP; /* clear wfe bitmap */ - reg &= ~TEGRA30_FLOW_CTRL_CSR_WFI_BITMAP; /* clear wfi bitmap */ + switch (tegra_chip_id) { + case TEGRA20: + /* clear wfe bitmap */ + reg &= ~TEGRA20_FLOW_CTRL_CSR_WFE_BITMAP; + /* clear wfi bitmap */ + reg &= ~TEGRA20_FLOW_CTRL_CSR_WFI_BITMAP; + break; + case TEGRA30: + /* clear wfe bitmap */ + reg &= ~TEGRA30_FLOW_CTRL_CSR_WFE_BITMAP; + /* clear wfi bitmap */ + reg &= ~TEGRA30_FLOW_CTRL_CSR_WFI_BITMAP; + break; + } reg &= ~FLOW_CTRL_CSR_ENABLE; /* clear enable */ reg |= FLOW_CTRL_CSR_INTR_FLAG; /* clear intr */ reg |= FLOW_CTRL_CSR_EVENT_FLAG; /* clear event */ diff --git a/arch/arm/mach-tegra/flowctrl.h b/arch/arm/mach-tegra/flowctrl.h index 0798dec..67eab56 100644 --- a/arch/arm/mach-tegra/flowctrl.h +++ b/arch/arm/mach-tegra/flowctrl.h @@ -34,6 +34,10 @@ #define FLOW_CTRL_HALT_CPU1_EVENTS 0x14 #define FLOW_CTRL_CPU1_CSR 0x18 +#define TEGRA20_FLOW_CTRL_CSR_WFE_CPU0 (1 << 4) +#define TEGRA20_FLOW_CTRL_CSR_WFE_BITMAP (3 << 4) +#define TEGRA20_FLOW_CTRL_CSR_WFI_BITMAP 0 + #define TEGRA30_FLOW_CTRL_CSR_WFI_CPU0 (1 << 8) #define TEGRA30_FLOW_CTRL_CSR_WFE_BITMAP (0xF << 4) #define TEGRA30_FLOW_CTRL_CSR_WFI_BITMAP (0xF << 8) -- 1.7.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
