This adds the power gpio key to DT and enable the wakeup of the gpio key for the device. The Seaboard and paz00 already had the power gpio key binding and the power key of Whistler was on KBC. So these boards' device tree didn't include in this patch.
Signed-off-by: Joseph Lo <[email protected]> --- V4: * no change V3: * no change V2: * no change --- arch/arm/boot/dts/tegra20-harmony.dts | 11 +++++++++++ arch/arm/boot/dts/tegra20-trimslice.dts | 11 +++++++++++ arch/arm/boot/dts/tegra20-ventana.dts | 11 +++++++++++ 3 files changed, 33 insertions(+) diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts index 1f79c0d..3532853 100644 --- a/arch/arm/boot/dts/tegra20-harmony.dts +++ b/arch/arm/boot/dts/tegra20-harmony.dts @@ -568,6 +568,17 @@ 0x1F0400D6>; /* KEY_QUESTION */ }; + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "Power"; + gpios = <&gpio 170 1>; /* gpio PV2, active low */ + linux,code = <116>; /* KEY_POWER */ + gpio-key,wakeup; + }; + }; + regulators { compatible = "simple-bus"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts index 98f3e44..3cfd9ed 100644 --- a/arch/arm/boot/dts/tegra20-trimslice.dts +++ b/arch/arm/boot/dts/tegra20-trimslice.dts @@ -335,6 +335,17 @@ gpios = <&gpio 191 1>; /* gpio PX7, active low */ }; + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "Power"; + gpios = <&gpio 190 1>; /* gpio PX6, active low */ + linux,code = <116>; /* KEY_POWER */ + gpio-key,wakeup; + }; + }; + regulators { compatible = "simple-bus"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts index 4aef56f..ede91c0 100644 --- a/arch/arm/boot/dts/tegra20-ventana.dts +++ b/arch/arm/boot/dts/tegra20-ventana.dts @@ -531,6 +531,17 @@ bus-width = <8>; }; + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "Power"; + gpios = <&gpio 170 1>; /* gpio PV2, active low */ + linux,code = <116>; /* KEY_POWER */ + gpio-key,wakeup; + }; + }; + regulators { compatible = "simple-bus"; #address-cells = <1>; -- 1.8.1.5 -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
