Palmas device have control outputs like REGEN1, REGEN2, REGEN3, SYSEN1 and SYSEN2. These control outputs can be used for controlling external voltage switches to enabled/disable voltage outputs.
Add support of these control outputs through regulator framework. Signed-off-by: Laxman Dewangan <[email protected]> --- drivers/regulator/palmas-regulator.c | 95 +++++++++++++++++++++++++++++---- include/linux/mfd/palmas.h | 6 ++ 2 files changed, 89 insertions(+), 12 deletions(-) diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c index 7c7992b..28080a7 100644 --- a/drivers/regulator/palmas-regulator.c +++ b/drivers/regulator/palmas-regulator.c @@ -166,6 +166,26 @@ static const struct regs_info palmas_regs_info[] = { .vsel_addr = PALMAS_LDOUSB_VOLTAGE, .ctrl_addr = PALMAS_LDOUSB_CTRL, }, + { + .name = "REGEN1", + .ctrl_addr = PALMAS_REGEN1_CTRL, + }, + { + .name = "REGEN2", + .ctrl_addr = PALMAS_REGEN2_CTRL, + }, + { + .name = "REGEN3", + .ctrl_addr = PALMAS_REGEN3_CTRL, + }, + { + .name = "SYSEN1", + .ctrl_addr = PALMAS_SYSEN1_CTRL, + }, + { + .name = "SYSEN2", + .ctrl_addr = PALMAS_SYSEN2_CTRL, + }, }; #define SMPS_CTRL_MODE_OFF 0x00 @@ -423,6 +443,12 @@ static struct regulator_ops palmas_ops_ldo = { .map_voltage = regulator_map_voltage_linear, }; +static struct regulator_ops palmas_ops_extreg = { + .is_enabled = regulator_is_enabled_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, +}; + /* * setup the hardware based sleep configuration of the SMPS/LDO regulators * from the platform data. This is different to the software based control @@ -524,6 +550,28 @@ static int palmas_ldo_init(struct palmas *palmas, int id, return 0; } +static int palmas_extreg_init(struct palmas *palmas, int id, + struct palmas_reg_init *reg_init) +{ + unsigned int addr; + int ret; + unsigned int val = 0; + + addr = palmas_regs_info[id].ctrl_addr; + + if (reg_init->mode_sleep) + val = PALMAS_REGEN1_CTRL_MODE_SLEEP; + + ret = palmas_update_bits(palmas, PALMAS_RESOURCE_BASE, + addr, PALMAS_REGEN1_CTRL_MODE_SLEEP, val); + if (ret < 0) { + dev_err(palmas->dev, "Resource reg 0x%02x update failed %d\n", + addr, ret); + return ret; + } + return 0; +} + static struct of_regulator_match palmas_matches[] = { { .name = "smps12", }, { .name = "smps123", }, @@ -546,6 +594,11 @@ static struct of_regulator_match palmas_matches[] = { { .name = "ldo9", }, { .name = "ldoln", }, { .name = "ldousb", }, + { .name = "regen1", }, + { .name = "regen2", }, + { .name = "regen3", }, + { .name = "sysen1", }, + { .name = "sysen2", }, }; static void palmas_dt_to_pdata(struct device *dev, @@ -764,21 +817,34 @@ static int palmas_regulators_probe(struct platform_device *pdev) /* Register the regulators */ pmic->desc[id].name = palmas_regs_info[id].name; pmic->desc[id].id = id; - pmic->desc[id].n_voltages = PALMAS_LDO_NUM_VOLTAGES; - - pmic->desc[id].ops = &palmas_ops_ldo; - pmic->desc[id].type = REGULATOR_VOLTAGE; pmic->desc[id].owner = THIS_MODULE; - pmic->desc[id].min_uV = 900000; - pmic->desc[id].uV_step = 50000; - pmic->desc[id].linear_min_sel = 1; - pmic->desc[id].vsel_reg = PALMAS_BASE_TO_REG(PALMAS_LDO_BASE, + + if (id < PALMAS_REG_REGEN1) { + pmic->desc[id].n_voltages = PALMAS_LDO_NUM_VOLTAGES; + pmic->desc[id].ops = &palmas_ops_ldo; + pmic->desc[id].min_uV = 900000; + pmic->desc[id].uV_step = 50000; + pmic->desc[id].linear_min_sel = 1; + pmic->desc[id].vsel_reg = + PALMAS_BASE_TO_REG(PALMAS_LDO_BASE, palmas_regs_info[id].vsel_addr); - pmic->desc[id].vsel_mask = PALMAS_LDO1_VOLTAGE_VSEL_MASK; - pmic->desc[id].enable_reg = PALMAS_BASE_TO_REG(PALMAS_LDO_BASE, + pmic->desc[id].vsel_mask = + PALMAS_LDO1_VOLTAGE_VSEL_MASK; + pmic->desc[id].enable_reg = + PALMAS_BASE_TO_REG(PALMAS_LDO_BASE, + palmas_regs_info[id].ctrl_addr); + pmic->desc[id].enable_mask = + PALMAS_LDO1_CTRL_MODE_ACTIVE; + } else { + pmic->desc[id].n_voltages = 1; + pmic->desc[id].ops = &palmas_ops_extreg; + pmic->desc[id].enable_reg = + PALMAS_BASE_TO_REG(PALMAS_RESOURCE_BASE, palmas_regs_info[id].ctrl_addr); - pmic->desc[id].enable_mask = PALMAS_LDO1_CTRL_MODE_ACTIVE; + pmic->desc[id].enable_mask = + PALMAS_REGEN1_CTRL_MODE_ACTIVE; + } if (pdata) config.init_data = pdata->reg_data[id]; @@ -804,7 +870,12 @@ static int palmas_regulators_probe(struct platform_device *pdev) if (pdata) { reg_init = pdata->reg_init[id]; if (reg_init) { - ret = palmas_ldo_init(palmas, id, reg_init); + if (id < PALMAS_REG_REGEN1) + ret = palmas_ldo_init(palmas, + id, reg_init); + else + ret = palmas_extreg_init(palmas, + id, reg_init); if (ret) { regulator_unregister(pmic->rdev[id]); goto err_unregister_regulator; diff --git a/include/linux/mfd/palmas.h b/include/linux/mfd/palmas.h index 4a066d0..fb04d07 100644 --- a/include/linux/mfd/palmas.h +++ b/include/linux/mfd/palmas.h @@ -164,6 +164,12 @@ enum palmas_regulators { PALMAS_REG_LDO9, PALMAS_REG_LDOLN, PALMAS_REG_LDOUSB, + /* External regulators */ + PALMAS_REG_REGEN1, + PALMAS_REG_REGEN2, + PALMAS_REG_REGEN3, + PALMAS_REG_SYSEN1, + PALMAS_REG_SYSEN2, /* Total number of regulators */ PALMAS_NUM_REGS, }; -- 1.7.1.1 -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
