Tegra 114 is different with other Tegra SoC chips. It using ARM Cortex-A15
as CPU core and a enhanced flow controller for CPU power control. So
we need to skip some code that was for Contex-A9 and some other support
code that was for other Tegra SoC chips. Then adding the proper power up
and hot plug control for Tegra114.
Verified on Seaboard, Cardhu and Dalmore.
V2:
* Double confirmed the patch set is OK with THUMB2_KERNEL enabled.
Joseph Lo (6):
ARM: tegra: add an assembly marco to check Tegra SoC ID
ARM: tegra: skip SCU and PL310 code when CPU is not Cortex-A9
ARM: tegra: make tegra_resume can work for Tegra114
ARM: tegra114: add power up sequence for warm boot CPU
clk: tegra114: implement wait_for_reset and disable_clock for
tegra_cpu_car_ops
ARM: tegra114: add CPU hotplug support
arch/arm/mach-tegra/Makefile | 1 +
arch/arm/mach-tegra/flowctrl.h | 1 +
arch/arm/mach-tegra/fuse.h | 22 ++++++++--------
arch/arm/mach-tegra/hotplug.c | 2 ++
arch/arm/mach-tegra/platsmp.c | 25 +++++++++++++++++-
arch/arm/mach-tegra/reset-handler.S | 51 +++++++++++++++++++++----------------
arch/arm/mach-tegra/sleep-tegra30.S | 30 ++++++++++++++++++----
arch/arm/mach-tegra/sleep.S | 8 +++---
arch/arm/mach-tegra/sleep.h | 35 ++++++++++++++++++++-----
drivers/clk/tegra/clk-tegra114.c | 23 ++++++++++++++++-
10 files changed, 150 insertions(+), 48 deletions(-)
--
1.8.2.2
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
