When there is a cluster power down cycle in suspend, we need to set up the correct L2 RAM data RAM latency to make L2 cache work correctly. This is only needed for cluster 0 and needs to be done in tegra_resume before the cache is enabled.
Signed-off-by: Joseph Lo <[email protected]> --- arch/arm/mach-tegra/reset-handler.S | 1 + arch/arm/mach-tegra/sleep.S | 22 ++++++++++++++++++++++ 2 files changed, 23 insertions(+) diff --git a/arch/arm/mach-tegra/reset-handler.S b/arch/arm/mach-tegra/reset-handler.S index 75285a3..34614bd 100644 --- a/arch/arm/mach-tegra/reset-handler.S +++ b/arch/arm/mach-tegra/reset-handler.S @@ -45,6 +45,7 @@ ENTRY(tegra_resume) check_cpu_part_num 0xc09, r8, r9 bleq v7_invalidate_l1 + blne tegra_init_l2_for_a15 cpu_id r0 tegra_get_soc_id TEGRA_APB_MISC_BASE, r6 diff --git a/arch/arm/mach-tegra/sleep.S b/arch/arm/mach-tegra/sleep.S index 6d6600d..8388113 100644 --- a/arch/arm/mach-tegra/sleep.S +++ b/arch/arm/mach-tegra/sleep.S @@ -69,6 +69,28 @@ ENDPROC(tegra_disable_clean_inv_dcache) #ifdef CONFIG_PM_SLEEP /* + * tegra_init_l2_for_a15 + * + * set up the correct L2 cache data RAM latency + */ +ENTRY(tegra_init_l2_for_a15) + mrc p15, 0, r0, c0, c0, 5 + ubfx r0, r0, #8, #4 + tst r0, #1 @ only need for cluster 0 + bne _exit_init_l2_a15 + + mrc p15, 0x1, r0, c9, c0, 2 + and r0, r0, #7 + cmp r0, #2 + bicne r0, r0, #7 + orrne r0, r0, #2 + mcrne p15, 0x1, r0, c9, c0, 2 +_exit_init_l2_a15: + + mov pc, lr +ENDPROC(tegra_init_l2_for_a15) + +/* * tegra_sleep_cpu_finish(unsigned long v2p) * * enters suspend in LP2 by turning off the mmu and jumping to -- 1.8.3.1 -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
