The LP1 suspend procedure is the same with Tegra30 and Tegra114. Just
need to update the difference of the register address, then we can
continue to share the code.
Signed-off-by: Joseph Lo <jose...@nvidia.com>
---
V2:
* squash from 2/7 to 5/7 in V1
---
arch/arm/mach-tegra/Makefile | 1 +
arch/arm/mach-tegra/flowctrl.c | 2 ++
arch/arm/mach-tegra/iomap.h | 3 +++
arch/arm/mach-tegra/pm.c | 12 +++++++++---
arch/arm/mach-tegra/sleep-tegra30.S | 33 ++++++++++++++++++++++++++++-----
5 files changed, 43 insertions(+), 8 deletions(-)
diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile
index de3748e..019bb17 100644
--- a/arch/arm/mach-tegra/Makefile
+++ b/arch/arm/mach-tegra/Makefile
@@ -36,6 +36,7 @@ ifeq ($(CONFIG_CPU_IDLE),y)
obj-$(CONFIG_ARCH_TEGRA_114_SOC) += cpuidle-tegra114.o
endif
obj-$(CONFIG_ARCH_TEGRA_124_SOC) += sleep-tegra30.o
+obj-$(CONFIG_ARCH_TEGRA_124_SOC) += pm-tegra30.o
ifeq ($(CONFIG_CPU_IDLE),y)
obj-$(CONFIG_ARCH_TEGRA_124_SOC) += cpuidle-tegra114.o
endif
diff --git a/arch/arm/mach-tegra/flowctrl.c b/arch/arm/mach-tegra/flowctrl.c
index 5348543..ce8ab8a 100644
--- a/arch/arm/mach-tegra/flowctrl.c
+++ b/arch/arm/mach-tegra/flowctrl.c
@@ -87,6 +87,7 @@ void flowctrl_cpu_suspend_enter(unsigned int cpuid)
break;
case TEGRA30:
case TEGRA114:
+ case TEGRA124:
/* clear wfe bitmap */
reg &= ~TEGRA30_FLOW_CTRL_CSR_WFE_BITMAP;
/* clear wfi bitmap */
@@ -125,6 +126,7 @@ void flowctrl_cpu_suspend_exit(unsigned int cpuid)
break;
case TEGRA30:
case TEGRA114:
+ case TEGRA124:
/* clear wfe bitmap */
reg &= ~TEGRA30_FLOW_CTRL_CSR_WFE_BITMAP;
/* clear wfi bitmap */
diff --git a/arch/arm/mach-tegra/iomap.h b/arch/arm/mach-tegra/iomap.h
index cbee57f..26b1c2a 100644
--- a/arch/arm/mach-tegra/iomap.h
+++ b/arch/arm/mach-tegra/iomap.h
@@ -105,6 +105,9 @@
#define TEGRA_EMC1_BASE 0x7001A800
#define TEGRA_EMC1_SIZE SZ_2K
+#define TEGRA124_EMC_BASE 0x7001B000
+#define TEGRA124_EMC_SIZE SZ_2K
+
#define TEGRA_CSITE_BASE 0x70040000
#define TEGRA_CSITE_SIZE SZ_256K
diff --git a/arch/arm/mach-tegra/pm.c b/arch/arm/mach-tegra/pm.c
index 36ed88a..4ae0286 100644
--- a/arch/arm/mach-tegra/pm.c
+++ b/arch/arm/mach-tegra/pm.c
@@ -59,8 +59,10 @@ static void tegra_tear_down_cpu_init(void)
break;
case TEGRA30:
case TEGRA114:
+ case TEGRA124:
if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) ||
- IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC))
+ IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) ||
+ IS_ENABLED(CONFIG_ARCH_TEGRA_124_SOC))
tegra_tear_down_cpu = tegra30_tear_down_cpu;
break;
}
@@ -216,8 +218,10 @@ static bool tegra_lp1_iram_hook(void)
break;
case TEGRA30:
case TEGRA114:
+ case TEGRA124:
if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) ||
- IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC))
+ IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) ||
+ IS_ENABLED(CONFIG_ARCH_TEGRA_124_SOC))
tegra30_lp1_iram_hook();
break;
default:
@@ -244,8 +248,10 @@ static bool tegra_sleep_core_init(void)
break;
case TEGRA30:
case TEGRA114:
+ case TEGRA124:
if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) ||
- IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC))
+ IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) ||
+ IS_ENABLED(CONFIG_ARCH_TEGRA_124_SOC))
tegra30_sleep_core_init();
break;
default:
diff --git a/arch/arm/mach-tegra/sleep-tegra30.S
b/arch/arm/mach-tegra/sleep-tegra30.S
index 7c529a1..b16d4a57 100644
--- a/arch/arm/mach-tegra/sleep-tegra30.S
+++ b/arch/arm/mach-tegra/sleep-tegra30.S
@@ -408,8 +408,12 @@ _pll_m_c_x_done:
cmp r10, #TEGRA30
movweq r0, #:lower16:TEGRA_EMC_BASE @ r0 reserved for emc base
movteq r0, #:upper16:TEGRA_EMC_BASE
- movwne r0, #:lower16:TEGRA_EMC0_BASE
- movtne r0, #:upper16:TEGRA_EMC0_BASE
+ cmp r10, #TEGRA114
+ movweq r0, #:lower16:TEGRA_EMC0_BASE
+ movteq r0, #:upper16:TEGRA_EMC0_BASE
+ cmp r10, #TEGRA124
+ movweq r0, #:lower16:TEGRA124_EMC_BASE
+ movteq r0, #:upper16:TEGRA124_EMC_BASE
exit_self_refresh:
ldr r1, [r5, #0xC] @ restore EMC_XM2VTTGENPADCTRL
@@ -556,6 +560,17 @@ tegra114_sdram_pad_address:
.word TEGRA_EMC1_BASE + EMC_XM2VTTGENPADCTRL2 @0x30
tegra114_sdram_pad_adress_end:
+tegra124_sdram_pad_address:
+ .word TEGRA124_EMC_BASE + EMC_CFG @0x0
+ .word TEGRA124_EMC_BASE + EMC_ZCAL_INTERVAL @0x4
+ .word TEGRA124_EMC_BASE + EMC_AUTO_CAL_INTERVAL @0x8
+ .word TEGRA124_EMC_BASE + EMC_XM2VTTGENPADCTRL @0xc
+ .word TEGRA124_EMC_BASE + EMC_XM2VTTGENPADCTRL2 @0x10
+ .word TEGRA_PMC_BASE + PMC_IO_DPD_STATUS @0x14
+ .word TEGRA_CLK_RESET_BASE + CLK_RESET_CLK_SOURCE_MSELECT @0x18
+ .word TEGRA_CLK_RESET_BASE + CLK_RESET_SCLK_BURST @0x1c
+tegra124_sdram_pad_address_end:
+
tegra30_sdram_pad_size:
.word tegra30_sdram_pad_address_end - tegra30_sdram_pad_address
@@ -700,8 +715,13 @@ tegra30_sdram_self_refresh:
cmp r10, #TEGRA30
adreq r2, tegra30_sdram_pad_address
ldreq r3, tegra30_sdram_pad_size
- adrne r2, tegra114_sdram_pad_address
- ldrne r3, tegra114_sdram_pad_size
+ cmp r10, #TEGRA114
+ adreq r2, tegra114_sdram_pad_address
+ ldreq r3, tegra114_sdram_pad_size
+ cmp r10, #TEGRA124
+ adreq r2, tegra124_sdram_pad_address
+ ldreq r3, tegra30_sdram_pad_size
+
mov r9, #0
padsave:
@@ -719,7 +739,10 @@ padsave_done:
cmp r10, #TEGRA30
ldreq r0, =TEGRA_EMC_BASE @ r0 reserved for emc base addr
- ldrne r0, =TEGRA_EMC0_BASE
+ cmp r10, #TEGRA114
+ ldreq r0, =TEGRA_EMC0_BASE
+ cmp r10, #TEGRA124
+ ldreq r0, =TEGRA124_EMC_BASE
enter_self_refresh:
cmp r10, #TEGRA30
--
1.8.4
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
