From: Mikko Perttunen <[email protected]> Add HDMI node to the Dalmore device tree and hook up the VDD and PLL regulators as well as the I2C adapter used for DDC and the GPIO used for hotplug detection.
Signed-off-by: Mikko Perttunen <[email protected]> Signed-off-by: Thierry Reding <[email protected]> --- arch/arm/boot/dts/tegra114-dalmore.dts | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts index 512922f049c3..73aecfb57ccb 100644 --- a/arch/arm/boot/dts/tegra114-dalmore.dts +++ b/arch/arm/boot/dts/tegra114-dalmore.dts @@ -17,6 +17,17 @@ }; host1x@50000000 { + hdmi@54280000 { + status = "okay"; + + vdd-supply = <&vdd_hdmi_reg>; + pll-supply = <&palmas_smps3_reg>; + + nvidia,ddc-i2c-bus = <&hdmi_ddc>; + nvidia,hpd-gpio = + <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; + }; + dsi@54300000 { status = "okay"; @@ -773,6 +784,10 @@ }; }; + hdmi_ddc: i2c@7000c700 { + status = "okay"; + }; + i2c@7000d000 { status = "okay"; clock-frequency = <400000>; -- 1.8.4.2 -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
