Venice2 has a 12.9" (2560x1700) panel connected to the eDP output of the
Tegra124. The panel has an EDID to describe the video timings but needs
a few extra nodes to get the backlight to come up.

Signed-off-by: Thierry Reding <[email protected]>
---
 arch/arm/boot/dts/tegra124-venice2.dts | 52 ++++++++++++++++++++++++++++++++++
 1 file changed, 52 insertions(+)

diff --git a/arch/arm/boot/dts/tegra124-venice2.dts 
b/arch/arm/boot/dts/tegra124-venice2.dts
index 7a4d5e23ddf4..b435cb5ec664 100644
--- a/arch/arm/boot/dts/tegra124-venice2.dts
+++ b/arch/arm/boot/dts/tegra124-venice2.dts
@@ -10,6 +10,20 @@
                reg = <0x80000000 0x80000000>;
        };
 
+       host1x@50000000 {
+               sor@54540000 {
+                       status = "okay";
+
+                       nvidia,dpaux = <&dpaux>;
+                       nvidia,panel = <&panel>;
+               };
+
+               dpaux: dpaux@545c0000 {
+                       vdd-supply = <&vdd_edp>;
+                       status = "okay";
+               };
+       };
+
        pinmux: pinmux@70000868 {
                pinctrl-names = "default";
                pinctrl-0 = <&pinmux_default>;
@@ -594,6 +608,17 @@
                };
        };
 
+       backlight: backlight {
+               compatible = "pwm-backlight";
+
+               enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+               power-supply = <&vdd_led>;
+               pwms = <&pwm 1 1000000>;
+
+               brightness-levels = <0 4 8 16 32 64 128 255>;
+               default-brightness-level = <6>;
+       };
+
        clocks {
                compatible = "simple-bus";
                #address-cells = <1>;
@@ -607,6 +632,13 @@
                };
        };
 
+       panel: panel {
+               compatible = "lg,lp129qe", "simple-panel";
+
+               backlight = <&backlight>;
+               ddc-i2c-bus = <&dpaux>;
+       };
+
        regulators {
                compatible = "simple-bus";
                #address-cells = <1>;
@@ -617,6 +649,26 @@
                        reg = <0>;
                        regulator-name = "sys_5v";
                };
+
+               vdd_edp: regulator@1 {
+                       compatible = "regulator-fixed";
+                       reg = <1>;
+                       regulator-name = "avdd_lcd";
+                       regulator-min-microvolt = <3300000>;
+                       regulator-max-microvolt = <3300000>;
+                       gpio = <&pmic 4 0 GPIO_ACTIVE_HIGH>;
+                       enable-active-high;
+               };
+
+               vdd_led: regulator@2 {
+                       compatible = "regulator-fixed";
+                       reg = <2>;
+                       regulator-name = "vdd_led";
+                       regulator-min-microvolt = <45000000>;
+                       regulator-max-microvolt = <45000000>;
+                       gpio = <&gpio TEGRA_GPIO(P, 2) 0 GPIO_ACTIVE_HIGH>;
+                       enable-active-high;
+               };
        };
 
        sound {
-- 
1.8.4.2

--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to