On 04/15/2014 06:54 PM, Andrew Bresticker wrote: > On Tue, Apr 15, 2014 at 3:29 PM, Stephen Warren <[email protected]> wrote: >> From: Stephen Warren <[email protected]> >> >> This regulator supplies power to pretty much everything on the board, so >> it doesn't make sense to allow it to turn off. Mark it boot-on and >> always-on so it doesn't get turned off. Without this, I see issues with >> the eMMC device; it can't be correctly detected during boot. > > This actually isn't a complete fix. +3V3_RUN will still toggle on a > cold boot because the GPIO1_INVERT bit is initialized by the PMIC to > 1, but when the regulator core requests the GPIO as an output, > as3722_gpio_direction_output() first sets the output value to 1 > (without considering the INVERT bit!) and then clears the invert bit > when setting the mode in as3722_pinctrl_gpio_set_direction(). The > as3722 driver should probably not touch the INVERT bit and instead > just take it into account when setting the GPIO value.
I'll take that as a heads-up on the existence of the AS3722 GPIO patch, rather than an objection to this patch. -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
