On Tue, Jan 6, 2015 at 9:09 AM, Stephen Warren <[email protected]> wrote: > On 01/06/2015 03:37 AM, Tomeu Vizoso wrote: >> >> Following 6dbaff2b, the kernel expects that the bootloader has correctly >> programmed the Tegra pinmux. >> >> DTs for the Jetson and the Venice2 had been updated already but this one >> was left behind. > > > So this setup is true for NVIDIA-controlled development/reference boards > where we've ensured that the bootloader sets up 100% of the pinmux. > > However, I know that Coreboot on this board doesn't set up everything in the > pinmux, and since it's in r/o flash never will. As such, I'm not sure this > change is safe for this board. That is, unless you want to force upstream > kernels to be booted via a chain-loaded path: Coreboot (r/o) -> U-Boot (r/w > with full pinmux setup) -> kernel.
That's correct. We did have a patch floating around to configure all the pinmux settings in coreboot, but that never made it in. While we could issue a R/W firmware update to apply the pinmux settings (unlikely to happen), it would still result in pinmux settings being applied in two separate locations - which, IIRC, was exactly what Stephen was trying to avoid by moving pinmux out of the device-trees. So I'd agree that pulling the pinmux settings out of the nyan* device-trees is not a good idea. -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
