[1.] One line summary of the problem:
Digital Wallet problems with latest version of storage drivers.
[2.] Full description of the problem/report:
I'm trying to get a Minds@Work Digital Wallet to work with
my Linux machine, and am having limited success. With recent kernel
versions and the latest (CVS) versions of usb-storage, I get as far
as having the device recognized, but when I try to mount the
device, it resets the device. After the reset, the device is
reconnected and assigned another SCSI device. Trying to mount
this device doesn't work, either.
Occasionally, the problem (another problem?) appears as
an endless series of "usb.c: USB device not accepting new address=xx",
but with more recent kernel versions, this only happens once or twice,
then the device is recognized.
I'm using usb-uhci, and it does not appear that interrupts
are being delivered to the driver every second.
I have a _lot_ of debug information from the kernel, if
anyone's interested.
[3.] Keywords (i.e., modules, networking, kernel):
usb
[4.] Kernel version (from /proc/version):
Linux version 2.4.3-pre4 ([EMAIL PROTECTED]) (gcc version 2.96 20000731 (Red Hat
Linux 7.0)) #1 Sun Mar 18 11:57:23 EST 2001
[5.] Output of Oops.. message (if applicable) with symbolic information
resolved (see Documentation/oops-tracing.txt)
[6.] A small shell script or example program which triggers the
problem (if possible)
[7.] Environment
[7.1.] Software (add the output of the ver_linux script here)
Linux kloognome.com 2.4.3-pre4 #1 Sun Mar 18 11:57:23 EST 2001 i686 unknown
Gnu C 2.96
Gnu make 3.79.1
binutils 2.10.0.18
util-linux 2.10m
modutils 2.4.3
e2fsprogs 1.18
pcmcia-cs 3.1.19
Linux C Library > libc.2.2
Dynamic linker (ldd) 2.2
Procps 2.0.7
Net-tools 1.56
Console-tools 0.3.3
Sh-utils 2.0
Modules Loaded 3c59x usb-uhci opl3 opl3sa2 ad1848 mpu401 sound soundcore
[7.2.] Processor information (from /proc/cpuinfo):
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 5
model name : Pentium II (Deschutes)
stepping : 2
cpu MHz : 350.820
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36
mmx fxsr
bogomips : 699.59
[7.3.] Module information (from /proc/modules):
3c59x 23808 1
usb-uhci 21904 0 (unused)
opl3 11728 0 (unused)
opl3sa2 7888 0
ad1848 17472 0 [opl3sa2]
mpu401 19216 0 [opl3sa2]
sound 57744 0 [opl3 opl3sa2 ad1848 mpu401]
soundcore 3984 6 [sound]
[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0100-0101 : OPL3-SA3
0170-0177 : ide1
01f0-01f7 : ide0
0213-0213 : isapnp read
0300-0301 : mpu401
0376-0376 : ide1
0378-037a : parport0
037b-037f : parport0
0388-038b : Yamaha OPL3
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0778-077a : parport0
0a79-0a79 : isapnp write
0cf8-0cff : PCI conf1
0e80-0e83 : WSS config
0e84-0e87 : MS Sound System
c000-cfff : PCI Bus #01
c000-c07f : Silicon Integrated Systems [SiS] 86C326
d000-d00f : VIA Technologies, Inc. Bus Master IDE
d400-d41f : VIA Technologies, Inc. UHCI USB
d400-d41f : usb-uhci
d800-d87f : 3Com Corporation 3c900B-TPO [Etherlink XL TPO]
d800-d87f : eth0
dc00-dcff : Symbios Logic Inc. (formerly NCR) 53c810
dc00-dc7f : ncr53c7,8xx
e000-e07f : Digital Equipment Corporation DECchip 21140 [FasterNet]
CPU0
0: 124973 XT-PIC timer
1: 1860 XT-PIC keyboard
2: 0 XT-PIC cascade
5: 12 XT-PIC 53c7,8xx
8: 1 XT-PIC rtc
9: 0 XT-PIC MS Sound System
10: 559 XT-PIC eth0
11: 0 XT-PIC usb-uhci
12: 0 XT-PIC PS/2 Mouse
14: 1371103 XT-PIC ide0
15: 2 XT-PIC ide1
NMI: 0
ERR: 0
[7.5.] PCI information ('lspci -vvv' as root)
00:00.0 Host bridge: VIA Technologies, Inc. VT82C691 [Apollo PRO] (rev 01)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 16
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [a0] AGP version 1.0
Status: RQ=7 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598 [Apollo MVP3 AGP] (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: e8000000-e9ffffff
Prefetchable memory behind bridge: ec000000-ec7fffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C596 ISA [Apollo PRO] (rev 05)
Subsystem: VIA Technologies, Inc. VT82C596/A/B PCI to ISA Bridge
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
00:07.1 IDE interface: VIA Technologies, Inc. VT82C586 IDE [Apollo] (rev 06) (prog-if
8a [Master SecP PriP])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64
Region 4: I/O ports at d000 [size=16]
00:07.2 USB Controller: VIA Technologies, Inc. VT82C586B USB (rev 02) (prog-if 00
[UHCI])
Subsystem: Unknown device 0925:1234
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64, cache line size 08
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at d400 [size=32]
00:07.3 Host bridge: VIA Technologies, Inc.: Unknown device 3050
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
00:08.0 Ethernet controller: 3Com Corporation 3c900B-TPO [Etherlink XL TPO] (rev 04)
Subsystem: 3Com Corporation 3C900B-TPO Etherlink XL TPO 10Mb
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (2500ns min, 12000ns max), cache line size 08
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at d800 [size=128]
Region 1: Memory at ec802000 (32-bit, non-prefetchable) [size=128]
Expansion ROM at ea000000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:09.0 Non-VGA unclassified device: Symbios Logic Inc. (formerly NCR) 53c810 (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at dc00 [size=256]
Region 1: Memory at ec800000 (32-bit, non-prefetchable) [size=256]
00:0a.0 Ethernet controller: Digital Equipment Corporation DECchip 21140 [FasterNet]
(rev 22)
Subsystem: Netgear FA310TX Fast Ethernet
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (5000ns min, 10000ns max), cache line size 08
Interrupt: pin A routed to IRQ 3
Region 0: I/O ports at e000 [size=128]
Region 1: Memory at ec801000 (32-bit, non-prefetchable) [size=128]
Expansion ROM at eb000000 [disabled] [size=256K]
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 86C326 (rev 0b)
(prog-if 00 [VGA])
Subsystem: Silicon Integrated Systems [SiS] SiS6326 GUI Accelerator
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (500ns min)
Region 0: Memory at ec000000 (32-bit, prefetchable) [size=8M]
Region 1: Memory at e9000000 (32-bit, non-prefetchable) [size=64K]
Region 2: I/O ports at c000 [size=128]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [40] Power Management version 1
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] AGP version 1.0
Status: RQ=1 SBA- 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
[7.6.] SCSI information (from /proc/scsi/scsi)
Attached devices:
Host: scsi0 Channel: 00 Id: 02 Lun: 00
Vendor: AIWA Model: TD-8000 Rev: 0137
Type: Sequential-Access ANSI SCSI revision: 02
[7.7.] Other information that might be relevant to the problem
(please look in /proc and include all information that you
think to be relevant):
[X.] Other notes, patches, fixes, workarounds:
--
[EMAIL PROTECTED]
"I know I do like the idea of a whole empire made up of footrests."
-- Jonah Goldberg, on the Ottoman Empire and
Bulgarian nationalism
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
http://lists.sourceforge.net/lists/listinfo/linux-usb-devel
