Hi,
Just wondering whether any work has been done on the PL-2303
serial driver? It doesn't seem to work with the
generic usbserial driver. If no one is working on it I would
volunteer.
Here are the register messages:
using insmod usbserial vendor=0x067b product=0x2303
hub.c: USB new device connect on bus1/1/3, assigned device number 5
usbserial.c: descriptor matches
usbserial.c: found interrupt in
usbserial.c: Generic converter detected
usbserial.c: Generic device with no bulk out, not allowed.
usbserial.c: descriptor matches
usbserial.c: found bulk out
usbserial.c: found bulk in
usbserial.c: Generic converter detected
usbserial.c: get_free_serial 1
usbserial.c: get_free_serial - minor base = 0
usbserial.c: usb_serial_probe - setting up 1 port structures for this device
usbserial.c: Generic converter now attached to ttyUSB0 (or usb/tts/0 for devfs)
Here are some typical messages:
usbserial.c: serial_ioctl - port 0, cmd 0x5415
usbserial.c: generic_chars_in_buffer - port 0
usbserial.c: generic_chars_in_buffer - returns 0
usbserial.c: generic_chars_in_buffer - port 0
usbserial.c: generic_chars_in_buffer - returns 0
usbserial.c: serial_ioctl - port 0, cmd 0x5415
usbserial.c: generic_chars_in_buffer - port 0
usbserial.c: generic_chars_in_buffer - returns 0
usbserial.c: generic_chars_in_buffer - port 0
usbserial.c: generic_chars_in_buffer - returns 0
--
Chan Shih-Ping (Richard) <[EMAIL PROTECTED]>
DSO National Laboratories
20 Science Park Drive
Singapore 118230
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
http://lists.sourceforge.net/lists/listinfo/linux-usb-devel
