Hi Julius,
thank you for testing the driver. It's nice to have you for testing the
SECAM
video format.
Julius Hrivnac wrote:
>
> Hi,
> I have french Hauppage WinTV USB (Model 40006 REV A Lot # 0008).
> I've added "{ idVendor: 0x0573, idProduct: 0x4d03 }" into usbvision.c
> and it now partly works:
>
> 1) "Composite 1" input works fine. It, however, in fact corresponds
> to the S-Video input on my card. My card doesn't have Composite
> input, only S-Video. So "chan == 1" should define "S-Video" and
> "chan == 2" doesn't exist.
Oh ;). I have only one plug too. And it is labeld S-Video.
But if you have a composite signal you can tell the videocodec (saa7111)
to find this signal
on one pin of the S-Video plug. Normaly S-Video uses 2 different pins
for luminance and chrominance.
But with a special cable you can use this 2 pins for 2 different
composite signals (Composite-1 and Composite-2). Composite-2 is not yet
in the driver because no one usually has such an adapter cable.
> 2) Also, I have to rename "Composite 1" to "Composite-1" to be able
> to use "vic" application. Otherwise, vic thinks there are two
> ports: "Composite" and "1". (It is probably bug of vic.) But vic
> still doesn't work as it apparently only uses "grabdisplay" and
> usbvision only works with "overlay".
I will rename it in the next version.
First usbvision supported grabdisplay and it worked fine. But you are
right, now grabdisplay didn't
work correct. Try the next version. I will put it on my site
(http://software.freepage.de/usbvision) as soon as possible.
> 3) I can get Swiss (PAL) channels well. I'm not able to get french
> (SECAM) channels. I see that something is there, but somehow they
> are not found correctly.
Here the work begins. First, did you call "modprobe usbvision norm=2"
for SECAM ?
If grabdisplay will work, could you please send an image of a SECAM
video?
> 4) I don't get /dev/vbi*. It is needed for VideoText and xawtv scantv
> program.
vbi is not supported yet.
Bye
Joerg.
--
-------------------------------------------------
FGAN - Forschungsgesellschaft fuer angewandte Naturwissenschaften e.V.
FHR - Forschungsinstitut fuer Hochfrequenzphysik und Radartechnik
PSK - Passive Sensorik, Stoerverfahren und Klassifizierung
Dipl.- Ing. Joerg Heckenbach
Neuenahrer Str. 20
D-53343 Wachtberg-Werthoven
Tel. +49 228-9435367
Fax. +49 228-9435627
e-Mail: [EMAIL PROTECTED]
-------------------------------------------------
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
http://lists.sourceforge.net/lists/listinfo/linux-usb-devel
