Hi,
After experimenting and drawing several blanks with my Freecom Desktop
external
cd-rw using the parallel port, I bought a USB cable for it. I still
cannot use it, however.
I can successfully load the usb-storage module (logs attached) but
cannot mount a
disk. Can anyone offer any advice? I have checked the reason for the
failure in
freecom_init (-110) and that looks, to me, like -ETIMEDOUT. Any
thoughts?
Thanks,
Richard
var_log_kernlog.gz
Host scsi0: usb-storage
Vendor: Freecom
Product: USB-IDE
Serial Number: None
Protocol: QIC-157
Transport: Freecom
GUID: 07abfc010000000000000000
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=fcc0
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=ff(vend.) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=07ab ProdID=fc01 Rev= 9.30
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 2mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=00(>ifc ) Sub=00 Prot=00 Driver=usb-storage
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms