Hello,
sorry for the late answer. I was on holiday last week.
The baudrate patch for the Sitecom device puzzles me a bit
because it's almost the opposite of the seetings I used on
my MCT device:
MCT SITECOM
115200 -> 0x1 0xc
57600 -> 0x2 0xb
38400 -> 0x4 0xa
This would mean that the 0711:0200 and the 0711:0230 devices
are significantly different. I will have some time towards
the end of the week to look into it in more detail.
If I remember correctly the Sitecom Win98 driver is somehow
different compared with the "original" MCT and DLINK driver
(from http://www.mct.com.tw/download). There is now also an
updated version of the Win98 driver to fix some problems
with PALM devices. I should look into that as well.
Wolfgang.
Greg KH wrote:
>
> On Wed, May 02, 2001 at 04:31:34PM +0200, Stelian Pop wrote:
> > This patch fixes the baud rate in the mct_u232 driver when
> > used with the Sitecom device.
> >
> > I only have the Sitecom device available so I've corrected the
> > baud rate calculation only for this model. Someone with a
> > real MCT or DLINK device should verify the original baud rate
> > calculation, because I suspect it to be wrong for all models
> > this driver supports (the same Windows driver is used for all
> > this models, so I suppose there is a unique baud rate calculation...).
> >
> > Anyway, this enables me to use my Siemens S25 cell modem (working
> > only at a fixed baud rate of 19200) with this adapter, so it may
> > be useful for some other people.
>
> Wolfgang, can you verify that this patch works on your devices?
>
> thanks,
>
> greg k-h
--
_________________________________________________________________
Wolfgang Grandegger CES - Creative Electronic Systems SA
Email: [EMAIL PROTECTED] 70, rte du Pont Butin
Phone: +41 22 879 51 00 CH-1213 Petit Lancy
Fax : +41 22 792 57 48 Switzerland
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
http://lists.sourceforge.net/lists/listinfo/linux-usb-devel
