Hello again,
Problem was:
kernel 2.4.4 + amd viper usb controller didn´t work with my webcam.
i have tested my Webcams with another Machine - and still the same
problem:
Jun 2 14:20:09 blub kernel: cpia.c:parse_picture(1947):EOL not found
giving up after 1350/81428 bytes.
Configuration is:
Linux 2.4.4
(can paste the .config if wanted)
Terratec Terracam USB.
Jun 2 14:23:54 blub kernel: usb.c: registered new driver hub
Jun 2 14:23:58 blub kernel: PCI: Found IRQ 11 for device 00:02.0
Jun 2 14:23:58 blub kernel: usb-ohci.c: USB OHCI at membase 0xc481b000,
IRQ 11
Jun 2 14:23:58 blub kernel: usb-ohci.c: usb-00:02.0, Acer Laboratories
Inc. [AL
i] M5237 USB
Jun 2 14:23:58 blub kernel: usb.c: new USB bus registered, assigned bus
number
1
Jun 2 14:23:58 blub kernel: hub.c: USB hub found
Jun 2 14:23:58 blub kernel: hub.c: 2 ports detected
Jun 2 14:23:58 blub kernel: hub.c: USB new device connect on bus1/1,
assigned d
evice number 2
Jun 2 14:23:58 blub kernel: usb.c: USB device 2 (vend/prod 0x553/0x2)
is not cl
aimed by any active driver.
Jun 2 14:24:05 blub kernel: Linux video capture interface: v1.00
Jun 2 14:24:08 blub kernel: V4L-Driver for Vision CPiA based cameras
v0.7.4
Jun 2 14:24:08 blub kernel: usb.c: registered new driver cpia
Jun 2 14:24:08 blub kernel: USB CPiA camera found
Jun 2 14:24:09 blub kernel: CPiA Version: 1.30 (2.10)
Jun 2 14:24:09 blub kernel: CPiA PnP-ID: 0553:0002:0100
Jun 2 14:24:09 blub kernel: VP-Version: 1.0 0141
dmesg gives:
cpia data error: [3] len=0, status=FFFFFFEE
cpia data error: [5] len=0, status=FFFFFFEE
cpia data error: [7] len=0, status=FFFFFFEE
cpia data error: [9] len=0, status=FFFFFFEE
cpia data error: [1] len=0, status=FFFFFFEE
cpia data error: [3] len=0, status=FFFFFFEE
cpia data error: [5] len=0, status=FFFFFFEE
cpia data error: [7] len=0, status=FFFFFFEE
cpia data error: [0] len=0, status=FFFFFFEE
cpia data error: [2] len=0, status=FFFFFFEE
cpia data error: [4] len=0, status=FFFFFFEE
cpia data error: [6] len=0, status=FFFFFFEE
cpia data error: [8] len=0, status=FFFFFFEE
cpia data error: [0] len=0, status=FFFFFFEE
cpia data error: [2] len=0, status=FFFFFFEE
cpia data error: [4] len=0, status=FFFFFFEE
cpia data error: [6] len=0, status=FFFFFFEE
cpia data error: [8] len=0, status=FFFFFFEE
cpia data error: [1] len=0, status=FFFFFFEE
cpia data error: [3] len=0, status=FFFFFFEE
cpia data error: [5] len=0, status=FFFFFFEE
cpia data error: [7] len=0, status=FFFFFFEE
cpia data error: [9] len=0, status=FFFFFFEE
and so on .......
i am going to test the webcam with linux 2.4.3 with the other controller
- cause there i had no problems with 2.4.3 on the amd viper usb
controller (except the oopses ;)) )
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
http://lists.sourceforge.net/lists/listinfo/linux-usb-devel
