Hi,
when I try to mount my digital camera, mount core dumps.
it used to work with earlier kernels.
I am using 2.4.5-ac22 currently.
Maybe someone can help.
bye,
claas
/var/log/syslog says:
---------------------
# switch on camera
Jun 30 15:59:32 zoo kernel: hub.c: port 2 connection change
Jun 30 15:59:32 zoo kernel: hub.c: port 2, portstatus 101, change 1, 12 Mb/s
Jun 30 15:59:32 zoo kernel: hub.c: port 2, portstatus 103, change 0, 12 Mb/s
Jun 30 15:59:32 zoo kernel: hub.c: USB new device connect on bus1/2, assigned device
number 6
Jun 30 15:59:32 zoo kernel: usb.c: kmalloc IF c753ab00, numif 1
Jun 30 15:59:32 zoo kernel: usb.c: new device strings: Mfr=0, Product=2, SerialNumber=3
Jun 30 15:59:32 zoo kernel: usb.c: USB device number 6 default language ID 0x409
Jun 30 15:59:32 zoo kernel: Product: USB Mass Storage
Jun 30 15:59:32 zoo kernel: SerialNumber: Y-171^^^^^000406X0000002006421
Jun 30 15:59:32 zoo kernel: usb-storage: act_altsettting is 0
Jun 30 15:59:32 zoo kernel: usb-storage: id_index calculated to be: 2
Jun 30 15:59:32 zoo kernel: usb-storage: Array length appears to be: 47
Jun 30 15:59:32 zoo kernel: usb-storage: Vendor: Fujifilm
Jun 30 15:59:32 zoo kernel: usb-storage: Product: FinePix 1400Zoom
Jun 30 15:59:32 zoo kernel: usb-storage: USB Mass Storage device detected
Jun 30 15:59:32 zoo kernel: usb-storage: Endpoints: In: 0xc81af480 Out: 0xc81af494
Int: 0xc81af4a8 (Period 1)
Jun 30 15:59:32 zoo kernel: usb-storage: Found existing GUID 04cb01000610000002006421
Jun 30 15:59:32 zoo kernel: usb-storage: Allocating IRQ for CBI transport
Jun 30 15:59:32 zoo kernel: usb-storage: usb_submit_urb() returns 0
Jun 30 15:59:32 zoo kernel: WARNING: USB Mass Storage data integrity not assured
Jun 30 15:59:32 zoo kernel: USB Mass Storage device found at 6
Jun 30 15:59:32 zoo kernel: usb.c: usb-storage driver claimed interface c753ab00
Jun 30 15:59:32 zoo kernel: usb.c: kusbd: /sbin/hotplug add 6
Jun 30 15:59:32 zoo kernel: usb.c: kusbd policy returned 0xfffffffe
# mount /dev/scsi/host2/bus0/target0/lun0/part1 /mnt/disk/
Jun 30 16:02:51 zoo kernel: usb-storage: queuecommand() called
Jun 30 16:02:51 zoo kernel: usb-storage: *** thread awakened.
Jun 30 16:02:51 zoo kernel: usb-storage: Command START_STOP (6 bytes)
Jun 30 16:02:51 zoo kernel: usb-storage: 1b 00 00 00 01 00 d1 c8 40 a0 ba c8
Jun 30 16:02:51 zoo kernel: usb-uhci.c: interrupt, status 3, frame# 763
Jun 30 16:02:51 zoo kernel: usb-storage: Call to usb_stor_control_msg() returned -32
Jun 30 16:02:51 zoo kernel: usb-storage: -- Stall on control pipe. Clearing
Jun 30 16:02:51 zoo kernel: usb-storage: USB IRQ received for device on host 2
Jun 30 16:02:51 zoo kernel: usb-storage: -- IRQ data length is 2
Jun 30 16:02:51 zoo kernel: usb-storage: -- IRQ state is 0
Jun 30 16:02:51 zoo kernel: usb-storage: -- Interrupt Status (0x29, 0x0)
Jun 30 16:02:51 zoo kernel: usb-storage: -- not a command-completion IRQ
Jun 30 16:02:51 zoo kernel: usb-storage: -- clear_halt() returns 0
Jun 30 16:02:51 zoo kernel: usb-storage: -- transport indicates command failure
Jun 30 16:02:51 zoo kernel: usb-storage: Issuing auto-REQUEST_SENSE
Jun 30 16:02:51 zoo kernel: usb-storage: Call to usb_stor_control_msg() returned 12
Jun 30 16:02:51 zoo kernel: usb-storage: usb_stor_transfer_partial(): xfer 18 bytes
Jun 30 16:02:51 zoo kernel: usb-storage: USB IRQ received for device on host 2
Jun 30 16:02:51 zoo kernel: usb-storage: -- IRQ data length is 2
Jun 30 16:02:51 zoo kernel: usb-storage: -- IRQ state is 0
Jun 30 16:02:51 zoo kernel: usb-storage: -- Interrupt Status (0x0, 0x0)
Jun 30 16:02:51 zoo kernel: usb-storage: -- Current value of ip_waitq is: 0
Jun 30 16:02:51 zoo kernel: usb-storage: usb_stor_bulk_msg() returned 0 xferred 18/18
Jun 30 16:02:51 zoo kernel: usb-storage: usb_stor_transfer_partial(): transfer complete
Jun 30 16:02:51 zoo kernel: usb-storage: CBI data stage result is 0x0
Jun 30 16:02:51 zoo kernel: usb-storage: Current value of ip_waitq is: 1
Jun 30 16:02:51 zoo kernel: usb-storage: Got interrupt data (0x0, 0x0)
Jun 30 16:02:51 zoo kernel: usb-storage: -- Result from auto-sense is 0
Jun 30 16:02:51 zoo kernel: usb-storage: -- code: 0x70, key: 0x6, ASC: 0x29, ASCQ: 0x0
Jun 30 16:02:51 zoo kernel: usb-storage: Unit Attention: (unknown ASC/ASCQ)
Jun 30 16:02:51 zoo kernel: usb-storage: scsi cmd done, result=0x2
Jun 30 16:02:51 zoo kernel: usb-storage: *** thread sleeping.
Jun 30 16:02:52 zoo kernel: VFS: Disk change detected on device sd(8,1)
Jun 30 16:02:52 zoo kernel: usb-storage: queuecommand() called
Jun 30 16:02:52 zoo kernel: usb-storage: *** thread awakened.
Jun 30 16:02:52 zoo kernel: usb-storage: Command TEST_UNIT_READY (6 bytes)
Jun 30 16:02:52 zoo kernel: usb-storage: 00 00 00 00 00 00 00 00 00 00 00 00
Jun 30 16:02:52 zoo kernel: usb-uhci.c: interrupt, status 3, frame# 1173
Jun 30 16:02:52 zoo kernel: usb-storage: USB IRQ received for device on host 2
Jun 30 16:02:52 zoo kernel: usb-storage: -- IRQ data length is 2
Jun 30 16:02:52 zoo kernel: usb-storage: -- IRQ state is 0
Jun 30 16:02:52 zoo kernel: usb-storage: -- Interrupt Status (0x28, 0x0)
Jun 30 16:02:52 zoo kernel: usb-storage: -- not a command-completion IRQ
Jun 30 16:02:52 zoo kernel: usb-storage: Call to usb_stor_control_msg() returned -32
Jun 30 16:02:52 zoo kernel: usb-storage: -- Stall on control pipe. Clearing
Jun 30 16:02:52 zoo kernel: usb-storage: -- clear_halt() returns 0
Jun 30 16:02:52 zoo kernel: usb-storage: -- transport indicates command failure
Jun 30 16:02:52 zoo kernel: usb-storage: Issuing auto-REQUEST_SENSE
Jun 30 16:02:52 zoo kernel: usb-storage: Call to usb_stor_control_msg() returned 12
Jun 30 16:02:52 zoo kernel: usb-storage: usb_stor_transfer_partial(): xfer 18 bytes
Jun 30 16:02:52 zoo kernel: usb-storage: USB IRQ received for device on host 2
Jun 30 16:02:52 zoo kernel: usb-storage: -- IRQ data length is 2
Jun 30 16:02:52 zoo kernel: usb-storage: -- IRQ state is 0
Jun 30 16:02:52 zoo kernel: usb-storage: -- Interrupt Status (0x0, 0x0)
Jun 30 16:02:52 zoo kernel: usb-storage: -- Current value of ip_waitq is: 0
Jun 30 16:02:52 zoo kernel: usb-storage: usb_stor_bulk_msg() returned 0 xferred 18/18
Jun 30 16:02:52 zoo kernel: usb-storage: usb_stor_transfer_partial(): transfer complete
Jun 30 16:02:52 zoo kernel: usb-storage: CBI data stage result is 0x0
Jun 30 16:02:52 zoo kernel: usb-storage: Current value of ip_waitq is: 1
Jun 30 16:02:52 zoo kernel: usb-storage: Got interrupt data (0x0, 0x0)
Jun 30 16:02:52 zoo kernel: usb-storage: -- Result from auto-sense is 0
Jun 30 16:02:52 zoo kernel: usb-storage: -- code: 0x70, key: 0x6, ASC: 0x28, ASCQ: 0x0
Jun 30 16:02:52 zoo kernel: usb-storage: Unit Attention: not ready to ready transition
(media change?)
Jun 30 16:02:52 zoo kernel: usb-storage: scsi cmd done, result=0x2
Jun 30 16:02:52 zoo kernel: usb-storage: *** thread sleeping.
Jun 30 16:02:52 zoo kernel: usb-storage: queuecommand() called
Jun 30 16:02:52 zoo kernel: usb-storage: *** thread awakened.
Jun 30 16:02:52 zoo kernel: usb-storage: Command TEST_UNIT_READY (6 bytes)
Jun 30 16:02:52 zoo kernel: usb-storage: 00 00 00 00 00 00 00 00 00 00 00 00
Jun 30 16:02:52 zoo kernel: usb-storage: Call to usb_stor_control_msg() returned 12
Jun 30 16:02:52 zoo kernel: usb-storage: Current value of ip_waitq is: 0
Jun 30 16:02:52 zoo kernel: usb-storage: USB IRQ received for device on host 2
Jun 30 16:02:52 zoo kernel: usb-storage: -- IRQ data length is 2
Jun 30 16:02:52 zoo kernel: usb-storage: -- IRQ state is 0
Jun 30 16:02:52 zoo kernel: usb-storage: -- Interrupt Status (0x0, 0x0)
Jun 30 16:02:52 zoo kernel: usb-storage: -- Current value of ip_waitq is: -1
Jun 30 16:02:52 zoo kernel: usb-storage: Got interrupt data (0x0, 0x0)
Jun 30 16:02:52 zoo kernel: usb-storage: scsi cmd done, result=0x0
Jun 30 16:02:52 zoo kernel: usb-storage: *** thread sleeping.
Jun 30 16:02:52 zoo kernel: usb-storage: queuecommand() called
Jun 30 16:02:52 zoo kernel: usb-storage: *** thread awakened.
Jun 30 16:02:52 zoo kernel: usb-storage: Command READ_CAPACITY (10 bytes)
Jun 30 16:02:52 zoo kernel: usb-storage: 25 00 00 00 00 00 00 00 00 00 00 00
Jun 30 16:02:52 zoo kernel: usb-storage: Call to usb_stor_control_msg() returned 12
Jun 30 16:02:52 zoo kernel: usb-storage: usb_stor_transfer_partial(): xfer 8 bytes
Jun 30 16:02:52 zoo kernel: usb-storage: usb_stor_bulk_msg() returned 0 xferred 8/8
Jun 30 16:02:52 zoo kernel: usb-storage: usb_stor_transfer_partial(): transfer complete
Jun 30 16:02:52 zoo kernel: usb-storage: CBI data stage result is 0x0
Jun 30 16:02:52 zoo kernel: usb-storage: Current value of ip_waitq is: 0
Jun 30 16:02:52 zoo kernel: usb-storage: USB IRQ received for device on host 2
Jun 30 16:02:52 zoo kernel: usb-storage: -- IRQ data length is 2
Jun 30 16:02:52 zoo kernel: usb-storage: -- IRQ state is 0
Jun 30 16:02:52 zoo kernel: usb-storage: -- Interrupt Status (0x0, 0x0)
Jun 30 16:02:52 zoo kernel: usb-storage: -- Current value of ip_waitq is: -1
Jun 30 16:02:52 zoo kernel: usb-storage: Got interrupt data (0x0, 0x0)
Jun 30 16:02:52 zoo kernel: usb-storage: scsi cmd done, result=0x0
Jun 30 16:02:52 zoo kernel: usb-storage: *** thread sleeping.
Jun 30 16:02:52 zoo kernel: SCSI device sda: 32000 512-byte hdwr sectors (16 MB)
Jun 30 16:02:52 zoo kernel: usb-storage: queuecommand() called
Jun 30 16:02:52 zoo kernel: usb-storage: *** thread awakened.
Jun 30 16:02:52 zoo kernel: usb-storage: Command MODE_SENSE (6 bytes)
Jun 30 16:02:52 zoo kernel: usb-storage: 1a 00 3f 00 08 00 00 00 00 00 00 00
Jun 30 16:02:52 zoo kernel: usb-storage: Call to usb_stor_control_msg() returned 12
Jun 30 16:02:52 zoo kernel: usb-storage: usb_stor_transfer_partial(): xfer 8 bytes
Jun 30 16:02:52 zoo kernel: usb-storage: usb_stor_bulk_msg() returned 0 xferred 8/8
Jun 30 16:02:52 zoo kernel: usb-storage: usb_stor_transfer_partial(): transfer complete
Jun 30 16:02:52 zoo kernel: usb-storage: CBI data stage result is 0x0
Jun 30 16:02:52 zoo kernel: usb-storage: Current value of ip_waitq is: 0
Jun 30 16:02:52 zoo kernel: usb-storage: USB IRQ received for device on host 2
Jun 30 16:02:52 zoo kernel: usb-storage: -- IRQ data length is 2
Jun 30 16:02:52 zoo kernel: usb-storage: -- IRQ state is 0
Jun 30 16:02:52 zoo kernel: usb-storage: -- Interrupt Status (0x0, 0x0)
Jun 30 16:02:52 zoo kernel: usb-storage: -- Current value of ip_waitq is: -1
Jun 30 16:02:52 zoo kernel: usb-storage: Got interrupt data (0x0, 0x0)
Jun 30 16:02:52 zoo kernel: usb-storage: -- converting 10 byte sense data to 6 byte
Jun 30 16:02:52 zoo kernel: usb-storage: scsi cmd done, result=0x0
Jun 30 16:02:52 zoo kernel: usb-storage: *** thread sleeping.
Jun 30 16:02:52 zoo kernel: sda: Write Protect is on
Jun 30 16:02:52 zoo kernel: /dev/scsi/host2/bus0/target0/lun0:<7>usb-storage:
queuecommand() called
Jun 30 16:02:52 zoo kernel: usb-storage: *** thread awakened.
Jun 30 16:02:52 zoo kernel: usb-storage: Command READ_10 (10 bytes)
Jun 30 16:02:52 zoo kernel: usb-storage: 28 00 00 00 00 00 00 00 02 00 00 00
Jun 30 16:02:52 zoo kernel: usb-storage: Call to usb_stor_control_msg() returned 12
Jun 30 16:02:52 zoo kernel: usb-storage: usb_stor_transfer_partial(): xfer 1024 bytes
Jun 30 16:02:52 zoo kernel: usb-storage: usb_stor_bulk_msg() returned 0 xferred
1024/1024
Jun 30 16:02:52 zoo kernel: usb-storage: usb_stor_transfer_partial(): transfer complete
Jun 30 16:02:52 zoo kernel: usb-storage: CBI data stage result is 0x0
Jun 30 16:02:52 zoo kernel: usb-storage: Current value of ip_waitq is: 0
Jun 30 16:02:52 zoo kernel: usb-storage: USB IRQ received for device on host 2
Jun 30 16:02:52 zoo kernel: usb-storage: -- IRQ data length is 2
Jun 30 16:02:52 zoo kernel: usb-storage: -- IRQ state is 0
Jun 30 16:02:52 zoo kernel: usb-storage: -- Interrupt Status (0x0, 0x0)
Jun 30 16:02:52 zoo kernel: usb-storage: -- Current value of ip_waitq is: -1
Jun 30 16:02:52 zoo kernel: usb-storage: Got interrupt data (0x0, 0x0)
Jun 30 16:02:52 zoo kernel: usb-storage: scsi cmd done, result=0x0
Jun 30 16:02:52 zoo kernel: usb-storage: *** thread sleeping.
Jun 30 16:02:52 zoo kernel: p1
Jun 30 16:02:52 zoo kernel: usb-storage: queuecommand() called
Jun 30 16:02:52 zoo kernel: usb-storage: *** thread awakened.
Jun 30 16:02:52 zoo kernel: usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
Jun 30 16:02:52 zoo kernel: usb-storage: 1e 00 00 00 01 00 ff ff 5d 4e 1e c0
Jun 30 16:02:52 zoo kernel: usb-storage: Call to usb_stor_control_msg() returned 12
Jun 30 16:02:52 zoo kernel: usb-storage: Current value of ip_waitq is: 0
Jun 30 16:02:52 zoo kernel: usb-storage: USB IRQ received for device on host 2
Jun 30 16:02:52 zoo kernel: usb-storage: -- IRQ data length is 2
Jun 30 16:02:52 zoo kernel: usb-storage: -- IRQ state is 0
Jun 30 16:02:52 zoo kernel: usb-storage: -- Interrupt Status (0x0, 0x0)
Jun 30 16:02:52 zoo kernel: usb-storage: -- Current value of ip_waitq is: -1
Jun 30 16:02:52 zoo kernel: usb-storage: Got interrupt data (0x0, 0x0)
Jun 30 16:02:52 zoo kernel: usb-storage: scsi cmd done, result=0x0
Jun 30 16:02:52 zoo kernel: usb-storage: *** thread sleeping.
Jun 30 16:02:52 zoo kernel: usb-storage: queuecommand() called
Jun 30 16:02:52 zoo kernel: usb-storage: *** thread awakened.
Jun 30 16:02:52 zoo kernel: usb-storage: Command READ_10 (10 bytes)
Jun 30 16:02:52 zoo kernel: usb-storage: 28 00 00 00 00 2b 00 00 02 00 00 00
Jun 30 16:02:52 zoo kernel: usb-storage: Call to usb_stor_control_msg() returned 12
Jun 30 16:02:52 zoo kernel: usb-storage: usb_stor_transfer_partial(): xfer 1024 bytes
Jun 30 16:02:52 zoo kernel: usb-storage: usb_stor_bulk_msg() returned 0 xferred
1024/1024
Jun 30 16:02:52 zoo kernel: usb-storage: usb_stor_transfer_partial(): transfer complete
Jun 30 16:02:52 zoo kernel: usb-storage: CBI data stage result is 0x0
Jun 30 16:02:52 zoo kernel: usb-storage: Current value of ip_waitq is: 0
Jun 30 16:02:52 zoo kernel: usb-storage: USB IRQ received for device on host 2
Jun 30 16:02:52 zoo kernel: usb-storage: -- IRQ data length is 2
Jun 30 16:02:52 zoo kernel: usb-storage: -- IRQ state is 0
Jun 30 16:02:52 zoo kernel: usb-storage: -- Interrupt Status (0x0, 0x0)
Jun 30 16:02:52 zoo kernel: usb-storage: -- Current value of ip_waitq is: -1
Jun 30 16:02:52 zoo kernel: usb-storage: Got interrupt data (0x0, 0x0)
Jun 30 16:02:52 zoo kernel: usb-storage: scsi cmd done, result=0x0
Jun 30 16:02:52 zoo kernel: usb-storage: *** thread sleeping.
Jun 30 16:02:52 zoo kernel: usb-storage: queuecommand() called
Jun 30 16:02:52 zoo kernel: usb-storage: *** thread awakened.
Jun 30 16:02:52 zoo kernel: usb-storage: Command READ_10 (10 bytes)
Jun 30 16:02:52 zoo kernel: usb-storage: 28 00 00 00 00 29 00 00 02 00 00 00
Jun 30 16:02:52 zoo kernel: usb-storage: Call to usb_stor_control_msg() returned 12
Jun 30 16:02:52 zoo kernel: usb-storage: usb_stor_transfer_partial(): xfer 1024 bytes
Jun 30 16:02:52 zoo kernel: usb-storage: usb_stor_bulk_msg() returned 0 xferred
1024/1024
Jun 30 16:02:52 zoo kernel: usb-storage: usb_stor_transfer_partial(): transfer complete
Jun 30 16:02:52 zoo kernel: usb-storage: CBI data stage result is 0x0
Jun 30 16:02:52 zoo kernel: usb-storage: Current value of ip_waitq is: 0
Jun 30 16:02:52 zoo kernel: usb-storage: USB IRQ received for device on host 2
Jun 30 16:02:52 zoo kernel: usb-storage: -- IRQ data length is 2
Jun 30 16:02:52 zoo kernel: usb-storage: -- IRQ state is 0
Jun 30 16:02:52 zoo kernel: usb-storage: -- Interrupt Status (0x0, 0x0)
Jun 30 16:02:52 zoo kernel: usb-storage: -- Current value of ip_waitq is: -1
Jun 30 16:02:52 zoo kernel: usb-storage: Got interrupt data (0x0, 0x0)
Jun 30 16:02:52 zoo kernel: usb-storage: scsi cmd done, result=0x0
Jun 30 16:02:52 zoo kernel: usb-storage: *** thread sleeping.
Jun 30 16:02:52 zoo kernel: usb-storage: queuecommand() called
Jun 30 16:02:52 zoo kernel: usb-storage: *** thread awakened.
Jun 30 16:02:52 zoo kernel: usb-storage: Command READ_10 (10 bytes)
Jun 30 16:02:52 zoo kernel: usb-storage: 28 00 00 00 00 39 00 00 04 00 00 00
Jun 30 16:02:52 zoo kernel: usb-storage: Call to usb_stor_control_msg() returned 12
Jun 30 16:02:52 zoo kernel: usb-storage: usb_stor_transfer_partial(): xfer 2048 bytes
Jun 30 16:02:52 zoo kernel: usb-storage: usb_stor_bulk_msg() returned 0 xferred
2048/2048
Jun 30 16:02:52 zoo kernel: usb-storage: usb_stor_transfer_partial(): transfer complete
Jun 30 16:02:52 zoo kernel: usb-storage: CBI data stage result is 0x0
Jun 30 16:02:52 zoo kernel: usb-storage: Current value of ip_waitq is: 0
Jun 30 16:02:52 zoo kernel: usb-storage: USB IRQ received for device on host 2
Jun 30 16:02:52 zoo kernel: usb-storage: -- IRQ data length is 2
Jun 30 16:02:52 zoo kernel: usb-storage: -- IRQ state is 0
Jun 30 16:02:52 zoo kernel: usb-storage: -- Interrupt Status (0x0, 0x0)
Jun 30 16:02:52 zoo kernel: usb-storage: -- Current value of ip_waitq is: -1
Jun 30 16:02:52 zoo kernel: usb-storage: Got interrupt data (0x0, 0x0)
Jun 30 16:02:52 zoo kernel: usb-storage: scsi cmd done, result=0x0
Jun 30 16:02:52 zoo kernel: usb-storage: *** thread sleeping.
Jun 30 16:02:52 zoo kernel: usb-storage: queuecommand() called
Jun 30 16:02:52 zoo kernel: usb-storage: *** thread awakened.
Jun 30 16:02:52 zoo kernel: usb-storage: Command READ_10 (10 bytes)
Jun 30 16:02:52 zoo kernel: usb-storage: 28 00 00 00 00 69 00 00 04 00 00 00
Jun 30 16:02:52 zoo kernel: usb-storage: Call to usb_stor_control_msg() returned 12
Jun 30 16:02:52 zoo kernel: usb-storage: usb_stor_transfer_partial(): xfer 2048 bytes
Jun 30 16:02:52 zoo kernel: usb-storage: usb_stor_bulk_msg() returned 0 xferred
2048/2048
Jun 30 16:02:52 zoo kernel: usb-storage: usb_stor_transfer_partial(): transfer complete
Jun 30 16:02:52 zoo kernel: usb-storage: CBI data stage result is 0x0
Jun 30 16:02:52 zoo kernel: usb-storage: Current value of ip_waitq is: 0
Jun 30 16:02:52 zoo kernel: usb-storage: USB IRQ received for device on host 2
Jun 30 16:02:52 zoo kernel: usb-storage: -- IRQ data length is 2
Jun 30 16:02:52 zoo kernel: usb-storage: -- IRQ state is 0
Jun 30 16:02:52 zoo kernel: usb-storage: -- Interrupt Status (0x0, 0x0)
Jun 30 16:02:52 zoo kernel: usb-storage: -- Current value of ip_waitq is: -1
Jun 30 16:02:52 zoo kernel: usb-storage: Got interrupt data (0x0, 0x0)
Jun 30 16:02:52 zoo kernel: usb-storage: scsi cmd done, result=0x0
Jun 30 16:02:52 zoo kernel: usb-storage: *** thread sleeping.
Jun 30 16:02:52 zoo kernel: usb-storage: queuecommand() called
Jun 30 16:02:52 zoo kernel: usb-storage: *** thread awakened.
Jun 30 16:02:52 zoo kernel: usb-storage: Command READ_10 (10 bytes)
Jun 30 16:02:52 zoo kernel: usb-storage: 28 00 00 00 00 2f 00 00 02 00 00 00
Jun 30 16:02:52 zoo kernel: usb-storage: Call to usb_stor_control_msg() returned 12
Jun 30 16:02:52 zoo kernel: usb-storage: usb_stor_transfer_partial(): xfer 1024 bytes
Jun 30 16:02:52 zoo kernel: usb-storage: usb_stor_bulk_msg() returned 0 xferred
1024/1024
Jun 30 16:02:52 zoo kernel: usb-storage: usb_stor_transfer_partial(): transfer complete
Jun 30 16:02:52 zoo kernel: usb-storage: CBI data stage result is 0x0
Jun 30 16:02:52 zoo kernel: usb-storage: Current value of ip_waitq is: 0
Jun 30 16:02:52 zoo kernel: usb-storage: USB IRQ received for device on host 2
Jun 30 16:02:52 zoo kernel: usb-storage: -- IRQ data length is 2
Jun 30 16:02:52 zoo kernel: usb-storage: -- IRQ state is 0
Jun 30 16:02:52 zoo kernel: usb-storage: -- Interrupt Status (0x0, 0x0)
Jun 30 16:02:52 zoo kernel: usb-storage: -- Current value of ip_waitq is: -1
Jun 30 16:02:52 zoo kernel: usb-storage: Got interrupt data (0x0, 0x0)
Jun 30 16:02:52 zoo kernel: usb-storage: scsi cmd done, result=0x0
Jun 30 16:02:52 zoo kernel: usb-storage: *** thread sleeping.
Jun 30 16:02:52 zoo kernel: usb-storage: queuecommand() called
Jun 30 16:02:52 zoo kernel: usb-storage: *** thread awakened.
Jun 30 16:02:52 zoo kernel: usb-storage: Command READ_10 (10 bytes)
Jun 30 16:02:52 zoo kernel: usb-storage: 28 00 00 00 00 2d 00 00 02 00 00 00
Jun 30 16:02:52 zoo kernel: usb-storage: Call to usb_stor_control_msg() returned 12
Jun 30 16:02:52 zoo kernel: usb-storage: usb_stor_transfer_partial(): xfer 1024 bytes
Jun 30 16:02:52 zoo kernel: usb-storage: usb_stor_bulk_msg() returned 0 xferred
1024/1024
Jun 30 16:02:52 zoo kernel: usb-storage: usb_stor_transfer_partial(): transfer complete
Jun 30 16:02:52 zoo kernel: usb-storage: CBI data stage result is 0x0
Jun 30 16:02:52 zoo kernel: usb-storage: Current value of ip_waitq is: 0
Jun 30 16:02:52 zoo kernel: usb-storage: USB IRQ received for device on host 2
Jun 30 16:02:52 zoo kernel: usb-storage: -- IRQ data length is 2
Jun 30 16:02:52 zoo kernel: usb-storage: -- IRQ state is 0
Jun 30 16:02:52 zoo kernel: usb-storage: -- Interrupt Status (0x0, 0x0)
Jun 30 16:02:52 zoo kernel: usb-storage: -- Current value of ip_waitq is: -1
Jun 30 16:02:52 zoo kernel: usb-storage: Got interrupt data (0x0, 0x0)
Jun 30 16:02:52 zoo kernel: usb-storage: scsi cmd done, result=0x0
Jun 30 16:02:52 zoo kernel: usb-storage: *** thread sleeping.
Jun 30 16:02:52 zoo kernel: usb-storage: queuecommand() called
Jun 30 16:02:52 zoo kernel: usb-storage: *** thread awakened.
Jun 30 16:02:52 zoo kernel: usb-storage: Command READ_10 (10 bytes)
Jun 30 16:02:52 zoo kernel: usb-storage: 28 00 00 00 00 31 00 00 08 00 00 00
Jun 30 16:02:52 zoo kernel: usb-storage: Call to usb_stor_control_msg() returned 12
Jun 30 16:02:52 zoo kernel: usb-storage: usb_stor_transfer_partial(): xfer 4096 bytes
Jun 30 16:02:52 zoo kernel: usb-storage: usb_stor_bulk_msg() returned 0 xferred
4096/4096
Jun 30 16:02:52 zoo kernel: usb-storage: usb_stor_transfer_partial(): transfer complete
Jun 30 16:02:52 zoo kernel: usb-storage: CBI data stage result is 0x0
Jun 30 16:02:52 zoo kernel: usb-storage: Current value of ip_waitq is: 0
Jun 30 16:02:52 zoo kernel: usb-storage: USB IRQ received for device on host 2
Jun 30 16:02:52 zoo kernel: usb-storage: -- IRQ data length is 2
Jun 30 16:02:52 zoo kernel: usb-storage: -- IRQ state is 0
Jun 30 16:02:52 zoo kernel: usb-storage: -- Interrupt Status (0x0, 0x0)
Jun 30 16:02:52 zoo kernel: usb-storage: -- Current value of ip_waitq is: -1
Jun 30 16:02:52 zoo kernel: usb-storage: Got interrupt data (0x0, 0x0)
Jun 30 16:02:52 zoo kernel: usb-storage: scsi cmd done, result=0x0
Jun 30 16:02:52 zoo kernel: usb-storage: *** thread sleeping.
Jun 30 16:02:52 zoo kernel: usb-storage: queuecommand() called
Jun 30 16:02:52 zoo kernel: usb-storage: *** thread awakened.
Jun 30 16:02:52 zoo kernel: usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
Jun 30 16:02:52 zoo kernel: usb-storage: 1e 00 00 00 00 00 00 00 04 00 00 00
Jun 30 16:02:52 zoo kernel: usb-storage: Call to usb_stor_control_msg() returned 12
Jun 30 16:02:52 zoo kernel: usb-storage: Current value of ip_waitq is: 0
Jun 30 16:02:52 zoo kernel: usb-storage: USB IRQ received for device on host 2
Jun 30 16:02:52 zoo kernel: usb-storage: -- IRQ data length is 2
Jun 30 16:02:52 zoo kernel: usb-storage: -- IRQ state is 0
Jun 30 16:02:52 zoo kernel: usb-storage: -- Interrupt Status (0x0, 0x0)
Jun 30 16:02:52 zoo kernel: usb-storage: -- Current value of ip_waitq is: -1
Jun 30 16:02:52 zoo kernel: usb-storage: Got interrupt data (0x0, 0x0)
Jun 30 16:02:52 zoo kernel: usb-storage: scsi cmd done, result=0x0
Jun 30 16:02:52 zoo kernel: usb-storage: *** thread sleeping.
# disconnect camera
Jun 30 16:03:02 zoo kernel: hub.c: port 2 connection change
Jun 30 16:03:02 zoo kernel: hub.c: port 2, portstatus 100, change 3, 12 Mb/s
Jun 30 16:03:02 zoo kernel: usb.c: USB disconnect on device 8
Jun 30 16:03:02 zoo kernel: usb-storage: storage_disconnect() called
Jun 30 16:03:02 zoo kernel: usb-storage: -- releasing irq URB
Jun 30 16:03:02 zoo kernel: usb-storage: USB IRQ received for device on host 2
Jun 30 16:03:02 zoo kernel: usb-storage: -- IRQ data length is 2
Jun 30 16:03:02 zoo kernel: usb-storage: -- IRQ state is -2
Jun 30 16:03:02 zoo kernel: usb-storage: -- Interrupt Status (0x0, 0x0)
Jun 30 16:03:02 zoo kernel: usb-storage: -- device has been removed
Jun 30 16:03:02 zoo kernel: usb-storage: -- usb_unlink_urb() returned 0
Jun 30 16:03:02 zoo kernel: usb-storage: -- releasing main URB
Jun 30 16:03:02 zoo kernel: usb-storage: -- usb_unlink_urb() returned -19
Jun 30 16:03:02 zoo kernel: usb.c: kusbd: /sbin/hotplug remove 8
Jun 30 16:03:02 zoo kernel: usb.c: kusbd policy returned 0xfffffffe
Jun 30 16:03:02 zoo kernel: hub.c: port 2 enable change, status 100
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
http://lists.sourceforge.net/lists/listinfo/linux-usb-devel
