Hi,
On 16-Sep-01 Roger So wrote:
> Hello,
>
> First of all, thanks for writing the pwc driver! The source is very
> readable; otherwise I wouldn't be writing this email. ;)
>
> I've figured out how to make pwc support the Samsung Anycam MPC-C10
> webcam; basically it's the same as a Philips 675/680. I found this out
> by taking apart the Anycam, and noticing that it essentially uses
> Philips parts (SAA8115HL, SAA8112HL, etc. -- am I correct that it's the
> same as a 675?)
Ah, cool! Well, that�s two new supported camera�s within one week :-)
Philips uses the SAA811* chips in all its webcams; from just the chipnumbers
I cannot tell which version it is. However, if you say it works with a
type_id of 675, then that�s enough. Did you try the decompression module as
well?
> The vendor_id is 0x055D, and product_id 0x9000.
>
> I've tested it with xawtv, and it works great.
Congratulations. It seems like you forgot the patch itself, but I�ll manage.
Thanks for the feedback.
- Nemosoft
-----------------------------------------------------------------------------
Try SorceryNet! One of the best IRC-networks around! irc.sorcery.net:9000
URL: never IRC: nemosoft IscaBBS (bbs.isca.uiowa.edu): Nemosoft
>> Never mind the daylight <<
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
