Hi,
Here's a patch against 2.4.12-ac3 that updates the Config.in files for
the USB tree to some more consistent layout and wording.
thanks,
greg k-h
diff --minimal -Nru a/drivers/usb/Config.in b/drivers/usb/Config.in
--- a/drivers/usb/Config.in Wed Oct 17 00:06:38 2001
+++ b/drivers/usb/Config.in Wed Oct 17 00:06:38 2001
@@ -35,15 +35,13 @@
dep_tristate ' USB Bluetooth support (EXPERIMENTAL)' CONFIG_USB_BLUETOOTH
$CONFIG_USB $CONFIG_EXPERIMENTAL
dep_tristate ' USB Mass Storage support' CONFIG_USB_STORAGE $CONFIG_USB $CONFIG_SCSI
dep_mbool ' USB Mass Storage verbose debug' CONFIG_USB_STORAGE_DEBUG
$CONFIG_USB_STORAGE
- dep_mbool ' Datafab MDCFE-B Compact Flash Reader' CONFIG_USB_STORAGE_DATAFAB
$CONFIG_USB_STORAGE $CONFIG_EXPERIMENTAL
+ dep_mbool ' Datafab MDCFE-B Compact Flash Reader support'
+CONFIG_USB_STORAGE_DATAFAB $CONFIG_USB_STORAGE $CONFIG_EXPERIMENTAL
dep_mbool ' Freecom USB/ATAPI Bridge support' CONFIG_USB_STORAGE_FREECOM
$CONFIG_USB_STORAGE
dep_mbool ' ISD-200 USB/ATA Bridge support' CONFIG_USB_STORAGE_ISD200
$CONFIG_USB_STORAGE
+ dep_mbool ' Microtech CompactFlash/SmartMedia support' CONFIG_USB_STORAGE_DPCM
+$CONFIG_USB_STORAGE
+ dep_mbool ' HP CD-Writer 82xx support' CONFIG_USB_STORAGE_HP8200e
+$CONFIG_USB_STORAGE $CONFIG_EXPERIMENTAL
+ dep_mbool ' SanDisk SDDR-09 (and other SmartMedia) support'
+CONFIG_USB_STORAGE_SDDR09 $CONFIG_USB_STORAGE $CONFIG_EXPERIMENTAL
dep_mbool ' Lexar Jumpshot Compact Flash Reader' CONFIG_USB_STORAGE_JUMPSHOT
$CONFIG_USB_STORAGE $CONFIG_EXPERIMENTAL
- dep_mbool ' Microtech CompactFlash/SmartMedia reader' CONFIG_USB_STORAGE_DPCM
$CONFIG_USB_STORAGE
- if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
- dep_mbool ' HP CD-Writer 82xx support' CONFIG_USB_STORAGE_HP8200e
$CONFIG_USB_STORAGE
- dep_mbool ' SanDisk SDDR-09 (and other SmartMedia) support'
CONFIG_USB_STORAGE_SDDR09 $CONFIG_USB_STORAGE
- fi
dep_tristate ' USB Modem (CDC ACM) support' CONFIG_USB_ACM $CONFIG_USB
dep_tristate ' USB Printer support' CONFIG_USB_PRINTER $CONFIG_USB
@@ -83,11 +81,10 @@
if [ "$CONFIG_NET" = "n" ]; then
comment ' Networking support is needed for USB Networking device support'
else
- dep_tristate ' PLUSB Prolific USB-Network driver (EXPERIMENTAL)' CONFIG_USB_PLUSB
$CONFIG_USB $CONFIG_NET $CONFIG_EXPERIMENTAL
dep_tristate ' USB ADMtek Pegasus-based ethernet device support (EXPERIMENTAL)'
CONFIG_USB_PEGASUS $CONFIG_USB $CONFIG_NET $CONFIG_EXPERIMENTAL
dep_tristate ' USB KLSI KL5USB101-based ethernet device support (EXPERIMENTAL)'
CONFIG_USB_KAWETH $CONFIG_USB $CONFIG_NET $CONFIG_EXPERIMENTAL
dep_tristate ' USB CATC NetMate-based Ethernet device support (EXPERIMENTAL)'
CONFIG_USB_CATC $CONFIG_USB $CONFIG_NET $CONFIG_EXPERIMENTAL
- dep_tristate ' USB Communication Class Ethernet driver (EXPERIMENTAL)'
CONFIG_USB_CDCETHER $CONFIG_USB $CONFIG_NET $CONFIG_EXPERIMENTAL
+ dep_tristate ' USB Communication Class Ethernet device support (EXPERIMENTAL)'
+CONFIG_USB_CDCETHER $CONFIG_USB $CONFIG_NET $CONFIG_EXPERIMENTAL
dep_tristate ' USB-to-USB Networking cable device support (EXPERIMENTAL)'
CONFIG_USB_USBNET $CONFIG_USB $CONFIG_NET $CONFIG_EXPERIMENTAL
fi
@@ -95,7 +92,7 @@
dep_tristate ' USS720 parport driver' CONFIG_USB_USS720 $CONFIG_USB $CONFIG_PARPORT
source drivers/usb/serial/Config.in
-comment 'Miscellaneous USB drivers'
+comment 'USB Miscellaneous drivers'
dep_tristate ' USB Diamond Rio500 support (EXPERIMENTAL)' CONFIG_USB_RIO500
$CONFIG_USB $CONFIG_EXPERIMENTAL
dep_tristate ' USB MassWorks ID-75 (EXPERIMENTAL)' CONFIG_USB_ID75 $CONFIG_USB
$CONFIG_EXPERIMENTAL
endmenu
diff --minimal -Nru a/drivers/usb/serial/Config.in b/drivers/usb/serial/Config.in
--- a/drivers/usb/serial/Config.in Wed Oct 17 00:06:39 2001
+++ b/drivers/usb/serial/Config.in Wed Oct 17 00:06:39 2001
@@ -7,7 +7,7 @@
dep_tristate 'USB Serial Converter support' CONFIG_USB_SERIAL $CONFIG_USB
if [ "$CONFIG_USB_SERIAL" = "y" ]; then
dep_mbool ' USB Serial Converter verbose debug' CONFIG_USB_SERIAL_DEBUG
$CONFIG_USB_SERIAL
-fi
+fi
dep_mbool ' USB Generic Serial Driver' CONFIG_USB_SERIAL_GENERIC $CONFIG_USB_SERIAL
dep_tristate ' USB Belkin and Peracom Single Port Serial Driver (EXPERIMENTAL)'
CONFIG_USB_SERIAL_BELKIN $CONFIG_USB_SERIAL $CONFIG_EXPERIMENTAL
dep_tristate ' USB ConnectTech WhiteHEAT Serial Driver (EXPERIMENTAL)'
CONFIG_USB_SERIAL_WHITEHEAT $CONFIG_USB_SERIAL $CONFIG_EXPERIMENTAL
@@ -19,14 +19,14 @@
dep_tristate ' USB Inside Out Edgeport Serial Driver (EXPERIMENTAL)'
CONFIG_USB_SERIAL_EDGEPORT $CONFIG_USB_SERIAL $CONFIG_EXPERIMENTAL
dep_tristate ' USB Keyspan PDA Single Port Serial Driver (EXPERIMENTAL)'
CONFIG_USB_SERIAL_KEYSPAN_PDA $CONFIG_USB_SERIAL $CONFIG_EXPERIMENTAL
dep_tristate ' USB Keyspan USA-xxx Serial Driver (EXPERIMENTAL)'
CONFIG_USB_SERIAL_KEYSPAN $CONFIG_USB_SERIAL $CONFIG_EXPERIMENTAL
-dep_mbool ' USB Keyspan USA-28 Firmware' CONFIG_USB_SERIAL_KEYSPAN_USA28
$CONFIG_USB_SERIAL_KEYSPAN
-dep_mbool ' USB Keyspan USA-28X Firmware' CONFIG_USB_SERIAL_KEYSPAN_USA28X
$CONFIG_USB_SERIAL_KEYSPAN
-dep_mbool ' USB Keyspan USA-28XA Firmware' CONFIG_USB_SERIAL_KEYSPAN_USA28XA
$CONFIG_USB_SERIAL_KEYSPAN
-dep_mbool ' USB Keyspan USA-28XB Firmware' CONFIG_USB_SERIAL_KEYSPAN_USA28XB
$CONFIG_USB_SERIAL_KEYSPAN
-dep_mbool ' USB Keyspan USA-19 Firmware' CONFIG_USB_SERIAL_KEYSPAN_USA19
$CONFIG_USB_SERIAL_KEYSPAN
-dep_mbool ' USB Keyspan USA-18X Firmware' CONFIG_USB_SERIAL_KEYSPAN_USA18X
$CONFIG_USB_SERIAL_KEYSPAN
-dep_mbool ' USB Keyspan USA-19W Firmware' CONFIG_USB_SERIAL_KEYSPAN_USA19W
$CONFIG_USB_SERIAL_KEYSPAN
-dep_mbool ' USB Keyspan USA-49W Firmware' CONFIG_USB_SERIAL_KEYSPAN_USA49W
$CONFIG_USB_SERIAL_KEYSPAN
+ dep_mbool ' USB Keyspan USA-28 Firmware' CONFIG_USB_SERIAL_KEYSPAN_USA28
+$CONFIG_USB_SERIAL_KEYSPAN
+ dep_mbool ' USB Keyspan USA-28X Firmware' CONFIG_USB_SERIAL_KEYSPAN_USA28X
+$CONFIG_USB_SERIAL_KEYSPAN
+ dep_mbool ' USB Keyspan USA-28XA Firmware' CONFIG_USB_SERIAL_KEYSPAN_USA28XA
+$CONFIG_USB_SERIAL_KEYSPAN
+ dep_mbool ' USB Keyspan USA-28XB Firmware' CONFIG_USB_SERIAL_KEYSPAN_USA28XB
+$CONFIG_USB_SERIAL_KEYSPAN
+ dep_mbool ' USB Keyspan USA-19 Firmware' CONFIG_USB_SERIAL_KEYSPAN_USA19
+$CONFIG_USB_SERIAL_KEYSPAN
+ dep_mbool ' USB Keyspan USA-18X Firmware' CONFIG_USB_SERIAL_KEYSPAN_USA18X
+$CONFIG_USB_SERIAL_KEYSPAN
+ dep_mbool ' USB Keyspan USA-19W Firmware' CONFIG_USB_SERIAL_KEYSPAN_USA19W
+$CONFIG_USB_SERIAL_KEYSPAN
+ dep_mbool ' USB Keyspan USA-49W Firmware' CONFIG_USB_SERIAL_KEYSPAN_USA49W
+$CONFIG_USB_SERIAL_KEYSPAN
dep_tristate ' USB MCT Single Port Serial Driver (EXPERIMENTAL)'
CONFIG_USB_SERIAL_MCT_U232 $CONFIG_USB_SERIAL $CONFIG_EXPERIMENTAL
dep_tristate ' USB Prolific 2303 Single Port Serial Driver (EXPERIMENTAL)'
CONFIG_USB_SERIAL_PL2303 $CONFIG_USB_SERIAL $CONFIG_EXPERIMENTAL
dep_tristate ' USB REINER SCT cyberJack pinpad/e-com chipcard reader (EXPERIMENTAL)'
CONFIG_USB_SERIAL_CYBERJACK $CONFIG_USB_SERIAL $CONFIG_EXPERIMENTAL
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
