Hi,
Here's a patch against 2.5.1-pre7 that adds locking to the usb bluetooth
driver, and removes the active variable, allowing the ports to be opened
by multiple users at the same time.
thanks,
greg k-h
diff -Nru a/drivers/usb/bluetooth.c b/drivers/usb/bluetooth.c
--- a/drivers/usb/bluetooth.c Fri Dec 7 21:30:08 2001
+++ b/drivers/usb/bluetooth.c Fri Dec 7 21:30:08 2001
@@ -1,11 +1,15 @@
/*
- * bluetooth.c Version 0.12
+ * bluetooth.c Version 0.13
*
* Copyright (c) 2000, 2001 Greg Kroah-Hartman <[EMAIL PROTECTED]>
* Copyright (c) 2000 Mark Douglas Corner <[EMAIL PROTECTED]>
*
* USB Bluetooth driver, based on the Bluetooth Spec version 1.0B
*
+ * (2001/11/30) Version 0.13 gkh
+ * - added locking patch from Masoodur Rahman <[EMAIL PROTECTED]>
+ * - removed active variable, as open_count will do.
+ *
* (2001/07/09) Version 0.12 gkh
* - removed in_interrupt() call, as it doesn't make sense to do
* that anymore.
@@ -118,7 +122,7 @@
/*
* Version Information
*/
-#define DRIVER_VERSION "v0.12"
+#define DRIVER_VERSION "v0.13"
#define DRIVER_AUTHOR "Greg Kroah-Hartman, Mark Douglas Corner"
#define DRIVER_DESC "USB Bluetooth tty driver"
@@ -170,8 +174,8 @@
struct tty_struct * tty; /* the coresponding tty for this port
*/
unsigned char minor; /* the starting minor number for this
device */
- char active; /* someone has this device open */
int throttle; /* throttled by tty layer */
+ int open_count;
__u8 control_out_bInterfaceNum;
struct urb * control_urb_pool[NUM_CONTROL_URBS];
@@ -200,6 +204,7 @@
unsigned char int_buffer[EVENT_BUFFER_SIZE];
unsigned int bulk_packet_pos;
unsigned char bulk_buffer[ACL_BUFFER_SIZE]; /* 64k preallocated,
fix? */
+ struct semaphore lock;
};
@@ -361,43 +366,46 @@
return -ENODEV;
}
- if (bluetooth->active) {
- dbg (__FUNCTION__ " - device already open");
- return -EINVAL;
- }
-
- /* set up our structure making the tty driver remember our object, and us it */
- tty->driver_data = bluetooth;
- bluetooth->tty = tty;
-
- /* force low_latency on so that our tty_push actually forces the data through,
- * otherwise it is scheduled, and with high data rates (like with OHCI) data
- * can get lost. */
- bluetooth->tty->low_latency = 1;
+ down (&bluetooth->lock);
+
+ ++bluetooth->open_count;
+ if (bluetooth->open_count == 1) {
+ /* set up our structure making the tty driver remember our object, and
+us it */
+ tty->driver_data = bluetooth;
+ bluetooth->tty = tty;
+
+ /* force low_latency on so that our tty_push actually forces the data
+through,
+ * otherwise it is scheduled, and with high data rates (like with OHCI)
+data
+ * can get lost. */
+ bluetooth->tty->low_latency = 1;
- bluetooth->active = 1;
-
- /* Reset the packet position counters */
- bluetooth->int_packet_pos = 0;
- bluetooth->bulk_packet_pos = 0;
+ /* Reset the packet position counters */
+ bluetooth->int_packet_pos = 0;
+ bluetooth->bulk_packet_pos = 0;
#ifndef BTBUGGYHARDWARE
- /* Start reading from the device */
- FILL_BULK_URB(bluetooth->read_urb, bluetooth->dev,
- usb_rcvbulkpipe(bluetooth->dev,
bluetooth->bulk_in_endpointAddress),
- bluetooth->bulk_in_buffer, bluetooth->bulk_in_buffer_size,
- bluetooth_read_bulk_callback, bluetooth);
- result = usb_submit_urb(bluetooth->read_urb);
- if (result)
- dbg(__FUNCTION__ " - usb_submit_urb(read bulk) failed with status %d",
result);
+ /* Start reading from the device */
+ FILL_BULK_URB (bluetooth->read_urb, bluetooth->dev,
+ usb_rcvbulkpipe(bluetooth->dev,
+bluetooth->bulk_in_endpointAddress),
+ bluetooth->bulk_in_buffer,
+ bluetooth->bulk_in_buffer_size,
+ bluetooth_read_bulk_callback, bluetooth);
+ result = usb_submit_urb(bluetooth->read_urb);
+ if (result)
+ dbg(__FUNCTION__ " - usb_submit_urb(read bulk) failed with
+status %d", result);
#endif
- FILL_INT_URB(bluetooth->interrupt_in_urb, bluetooth->dev,
- usb_rcvintpipe(bluetooth->dev,
bluetooth->interrupt_in_endpointAddress),
- bluetooth->interrupt_in_buffer,
bluetooth->interrupt_in_buffer_size,
- bluetooth_int_callback, bluetooth,
bluetooth->interrupt_in_interval);
- result = usb_submit_urb(bluetooth->interrupt_in_urb);
- if (result)
- dbg(__FUNCTION__ " - usb_submit_urb(interrupt in) failed with status
%d", result);
+ FILL_INT_URB (bluetooth->interrupt_in_urb, bluetooth->dev,
+ usb_rcvintpipe(bluetooth->dev,
+bluetooth->interrupt_in_endpointAddress),
+ bluetooth->interrupt_in_buffer,
+ bluetooth->interrupt_in_buffer_size,
+ bluetooth_int_callback, bluetooth,
+ bluetooth->interrupt_in_interval);
+ result = usb_submit_urb(bluetooth->interrupt_in_urb);
+ if (result)
+ dbg(__FUNCTION__ " - usb_submit_urb(interrupt in) failed with
+status %d", result);
+ }
+
+ up(&bluetooth->lock);
return 0;
}
@@ -414,18 +422,24 @@
dbg(__FUNCTION__);
- if (!bluetooth->active) {
+ if (!bluetooth->open_count) {
dbg (__FUNCTION__ " - device not opened");
return;
}
- /* shutdown any bulk reads and writes that might be going on */
- for (i = 0; i < NUM_BULK_URBS; ++i)
- usb_unlink_urb (bluetooth->write_urb_pool[i]);
- usb_unlink_urb (bluetooth->read_urb);
- usb_unlink_urb (bluetooth->interrupt_in_urb);
-
- bluetooth->active = 0;
+ down (&bluetooth->lock);
+
+ --bluetooth->open_count;
+ if (bluetooth->open_count <= 0) {
+ bluetooth->open_count = 0;
+
+ /* shutdown any bulk reads and writes that might be going on */
+ for (i = 0; i < NUM_BULK_URBS; ++i)
+ usb_unlink_urb (bluetooth->write_urb_pool[i]);
+ usb_unlink_urb (bluetooth->read_urb);
+ usb_unlink_urb (bluetooth->interrupt_in_urb);
+ }
+ up(&bluetooth->lock);
}
@@ -447,7 +461,7 @@
dbg(__FUNCTION__ " - %d byte(s)", count);
- if (!bluetooth->active) {
+ if (!bluetooth->open_count) {
dbg (__FUNCTION__ " - device not opened");
return -EINVAL;
}
@@ -572,7 +586,7 @@
dbg(__FUNCTION__);
- if (!bluetooth->active) {
+ if (!bluetooth->open_count) {
dbg (__FUNCTION__ " - device not open");
return -EINVAL;
}
@@ -598,7 +612,7 @@
return -ENODEV;
}
- if (!bluetooth->active) {
+ if (!bluetooth->open_count) {
dbg (__FUNCTION__ " - device not open");
return -EINVAL;
}
@@ -624,7 +638,7 @@
dbg(__FUNCTION__);
- if (!bluetooth->active) {
+ if (!bluetooth->open_count) {
dbg (__FUNCTION__ " - device not open");
return;
}
@@ -645,7 +659,7 @@
dbg(__FUNCTION__);
- if (!bluetooth->active) {
+ if (!bluetooth->open_count) {
dbg (__FUNCTION__ " - device not open");
return;
}
@@ -664,7 +678,7 @@
dbg(__FUNCTION__ " - cmd 0x%.4x", cmd);
- if (!bluetooth->active) {
+ if (!bluetooth->open_count) {
dbg (__FUNCTION__ " - device not open");
return -ENODEV;
}
@@ -684,7 +698,7 @@
dbg(__FUNCTION__);
- if (!bluetooth->active) {
+ if (!bluetooth->open_count) {
dbg (__FUNCTION__ " - device not open");
return;
}
@@ -706,7 +720,7 @@
dbg(__FUNCTION__);
- if (!bluetooth->active) {
+ if (!bluetooth->open_count) {
dbg (__FUNCTION__ " - device not open");
return;
}
@@ -731,7 +745,7 @@
dbg(__FUNCTION__);
- if (!bluetooth->active) {
+ if (!bluetooth->open_count) {
dbg (__FUNCTION__ " - device not open");
return;
}
@@ -961,7 +975,7 @@
}
exit:
- if (!bluetooth || !bluetooth->active)
+ if (!bluetooth || !bluetooth->open_count)
return;
FILL_BULK_URB(bluetooth->read_urb, bluetooth->dev,
@@ -1102,6 +1116,7 @@
bluetooth->minor = minor;
bluetooth->tqueue.routine = bluetooth_softint;
bluetooth->tqueue.data = bluetooth;
+ init_MUTEX(&bluetooth->lock);
/* record the interface number for the control out */
bluetooth->control_out_bInterfaceNum = control_out_endpoint;
@@ -1217,10 +1232,10 @@
int i;
if (bluetooth) {
- if ((bluetooth->active) && (bluetooth->tty))
+ if ((bluetooth->open_count) && (bluetooth->tty))
tty_hangup(bluetooth->tty);
- bluetooth->active = 0;
+ bluetooth->open_count = 0;
if (bluetooth->read_urb) {
usb_unlink_urb (bluetooth->read_urb);
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
