Erez Doron wrote :
> hi
>
> i have linux rh-7.0 with kernel 2.4.16
> I have installed KC-180-usb-irda and linux automatically identified it
> and insmod the appropriate modules, telling me to use /dev/usb/ttyUSB0.
> i tried to open minicom with different baud rates on /dev/usb/ttyUSB0
> but got no date in or out. ( note that without the irda device, I
> couldn't have
> opened /dev/usb/ttyUSB0, so that is the right device).
>
> after I upgraded to 2.4.17pre8, i could see data incoming on
> /dev/usb/ttyUSB0 whenever I press hotsync on my palm III.
> so i ran slattach on that device and echo 1 >
> /proc/sys/net/irda/discovery.
> irdadump showed me the discovery frames I sent to the palm,
> but would not show me the frames i got from the palm
> ( though the discovery cycle stoppped whenever i pressed hotsync).
> note that tcpdump on irda0 gave the same as irdadump.
>
> can anyone help ?
>
>
> thanks
> erez.
Please ask the Linux-USB people, I'm not responsible for their
mistakes and I can't fix them. The Linux-USB mailing list is at :
[EMAIL PROTECTED]
Once the USB people have fixed their config files, just use
the standard procedure documented here :
http://www.hpl.hp.com/personal/Jean_Tourrilhes/IrDA/IrDA.html#config
Good luck...
Jean
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
