Hello,
Have their been any reports of the following errors with the
current keyspan usb drivers in 2.4.17-rc1? I have seen the following
for sometime now...
Dec 20 10:30:36 bogus kernel: usb.c: registered new driver serial
Dec 20 10:30:36 bogus kernel: usbserial.c: USB Serial Driver core v1.4
Dec 20 10:30:36 bogus kernel: usbserial.c: USB Serial support registered for Keyspan
USA18X - (without firmware)
Dec 20 10:30:36 bogus kernel: usbserial.c: USB Serial support registered for Keyspan
USA19 - (without firmware)
Dec 20 10:30:36 bogus kernel: usbserial.c: USB Serial support registered for Keyspan
USA19W - (without firmware)
Dec 20 10:30:36 bogus kernel: usbserial.c: USB Serial support registered for Keyspan
USA28 - (without firmware)
Dec 20 10:30:36 bogus kernel: usbserial.c: USB Serial support registered for Keyspan
USA28X - (without firmware)
Dec 20 10:30:36 bogus kernel: usbserial.c: Keyspan USA28X - (without firmware)
converter detected
Dec 20 10:30:36 bogus kernel: usbserial.c: USB Serial support registered for Keyspan
USA28XA - (without firmware)
Dec 20 10:30:36 bogus kernel: usbserial.c: Keyspan USA28X - (without firmware)
converter detected
Dec 20 10:30:36 bogus kernel: usbserial.c: ezusb_set_reset_R9a81da3a- 1 failed
Dec 20 10:30:36 bogus kernel: keyspan.c: ezusb_writememory failed for Keyspanfirmware
(-110 0033 e2179001 3)
Dec 20 10:30:36 bogus kernel: usbserial.c: ezusb_set_reset_R9a81da3a- 0 failed
Dec 20 10:30:36 bogus kernel: usbserial.c: USB Serial support registered for Keyspan
USA28XB - (without firmware)
Dec 20 10:30:36 bogus kernel: usbserial.c: Keyspan USA28X - (without firmware)
converter detected
Dec 20 10:30:36 bogus kernel: usbserial.c: ezusb_set_reset_R9a81da3a- 1 failed
Dec 20 10:30:36 bogus kernel: keyspan.c: ezusb_writememory failed for Keyspanfirmware
(-110 0033 e2179001 3)
Dec 20 10:30:36 bogus kernel: usb.c: USB disconnect on device 5
Dec 20 10:30:36 bogus kernel: usbserial.c: ezusb_set_reset_R9a81da3a- 0 failed
Dec 20 10:30:36 bogus kernel: usbserial.c: USB Serial support registered for Keyspan
USA49W - (without firmware)
Dec 20 10:30:36 bogus kernel: usbserial.c: USB Serial support registered for Keyspan
USA18X
Dec 20 10:30:36 bogus kernel: usbserial.c: USB Serial support registered for Keyspan
USA19
Dec 20 10:30:36 bogus kernel: usbserial.c: USB Serial support registered for Keyspan
USA19W
Dec 20 10:30:36 bogus kernel: usbserial.c: USB Serial support registered for Keyspan
USA28
Dec 20 10:30:36 bogus kernel: usbserial.c: USB Serial support registered for Keyspan
USA28X/XB
Dec 20 10:30:36 bogus kernel: usbserial.c: USB Serial support registered for Keyspan
USA28XA
Dec 20 10:30:36 bogus kernel: usbserial.c: USB Serial support registered for Key
span USA49W
Dec 20 10:30:36 bogus kernel: keyspan.c: v1.1.1:Keyspan USB to Serial Converter Driver
Dec 20 10:30:36 bogus kernel: usbdevfs: USBDEVFS_CONTROL failed dev 6 rqt 128 rq 6 len
18 ret -32
Dec 20 10:30:36 bogus last message repeated 2 times
Dec 20 10:30:36 bogus kernel: hub.c: USB new device connect on bus1/1/3, assigned
device number 7
Dec 20 10:30:36 bogus kernel: usbserial.c: Keyspan USA28X/XB converter detected
Dec 20 10:30:36 bogus kernel: usbserial.c: Keyspan USA28X/XB converter now attached to
ttyUSB0 (or usb/tts/0 for devfs)
Dec 20 10:30:36 bogus kernel: usbserial.c: Keyspan USA28X/XB converter now attached to
ttyUSB1 (or usb/tts/1 for devfs)
However the usb/tts/1 and usb/tts/0 don't appear to function. Are the error
message for ezusb_set_reset_R9a81da3a- failing suggestive that the driver
is failing to load the driver into the USA-28X? Thanks in advance for any
information.
Jack
ps This is on a Powermac G4/AGP 450 using Ben Herrenschmidt's Powermac
kernel tree which is at 2.4.17-rc1 at the moment.
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
