Hi,
Here's a patch against 2.5.3-pre2 that for the USB serial ftdi_sio
driver that adds support for a new device to the driver. This patch was
done by Dimitri.
thanks,
greg k-h
diff -Nru a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
--- a/drivers/usb/serial/ftdi_sio.c Mon Jan 21 10:48:39 2002
+++ b/drivers/usb/serial/ftdi_sio.c Mon Jan 21 10:48:39 2002
@@ -138,6 +138,7 @@
static __devinitdata struct usb_device_id id_table_8U232AM [] = {
{ USB_DEVICE(FTDI_VID, FTDI_8U232AM_PID) },
+ { USB_DEVICE(FTDI_NF_RIC_VID, FTDI_NF_RIC_PID) },
{ } /* Terminating entry */
};
@@ -145,6 +146,7 @@
static __devinitdata struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_SIO_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_8U232AM_PID) },
+ { USB_DEVICE(FTDI_NF_RIC_VID, FTDI_NF_RIC_PID) },
{ } /* Terminating entry */
};
diff -Nru a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
--- a/drivers/usb/serial/ftdi_sio.h Mon Jan 21 10:48:39 2002
+++ b/drivers/usb/serial/ftdi_sio.h Mon Jan 21 10:48:39 2002
@@ -22,6 +22,8 @@
#define FTDI_VID 0x0403 /* Vendor Id */
#define FTDI_SIO_PID 0x8372 /* Product Id SIO application of 8U100AX */
#define FTDI_8U232AM_PID 0x6001 /* Similar device to SIO above */
+#define FTDI_NF_RIC_VID 0x0DCD /* Vendor Id */
+#define FTDI_NF_RIC_PID 0x0001 /* Product Id */
#define FTDI_SIO_RESET 0 /* Reset the port */
#define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
