Host controllers and slave controllers are _very_ different beasts. While there are only a few standards for host controllers, there are no standards for slave controllers.
You _could_ use a host controller and a usbnet device, if you wanted the most turnkey solution.... otherwise, you'll have to find a slave controller and write a driver yourself. Matt On Fri, Jan 25, 2002 at 02:53:58AM -0500, John Ketchpaw wrote: > (sorry if this is a bad place to ask about this stuff) > > i'm trying to put together an embedded device that will connect via USB to > a host computer to allow some realtime offboard audio processing. > > my current plan is to do this with a SBC running linux, with a couple pc104 > sound cards slapped onto it. > > the two issues that i'm confused about right now: > > -how does one set things up on the device side? the device has to run in > slave mode, if i am correctly informed, but i haven't been able to find > anything that quite cries out how to do that. > > -is it possible to do this on the average USB controller, or am i going to > have to be careful of which chipset is on the board i use? > > if these questions turn out to be retarded, sorry..i'm downloading the > documentation as i write this > > thanks > > -- > John Ketchpaw > [EMAIL PROTECTED] > > _______________________________________________ > [EMAIL PROTECTED] > To unsubscribe, use the last form field at: > https://lists.sourceforge.net/lists/listinfo/linux-usb-devel -- Matthew Dharm Home: [EMAIL PROTECTED] Maintainer, Linux USB Mass Storage Driver NYET! The evil stops here! -- Pitr User Friendly, 6/22/1998
msg04220/pgp00000.pgp
Description: PGP signature
