Hi,
Here's a patch against 2.4.18-pre6 for the USB usb-uhci host controller
driver that fixes the following problems:
- one shot interrupts work now, there was a wrong data toggle...
- correct timeout check with time_after-macros
- memory leak in synchronous unlinking of interrupt URBs
- uhci_pci_remove was declared __devexit
- CPU-speed dependent delay in start_hc()
This patch was done by Georg Acher.
thanks,
greg k-h
diff -Nru a/drivers/usb/usb-uhci.c b/drivers/usb/usb-uhci.c
--- a/drivers/usb/usb-uhci.c Sat Jan 26 19:56:08 2002
+++ b/drivers/usb/usb-uhci.c Sat Jan 26 19:56:08 2002
@@ -16,7 +16,7 @@
* (C) Copyright 1999 Randy Dunlap
* (C) Copyright 1999 Gregory P. Smith
*
- * $Id: usb-uhci.c,v 1.268 2001/08/29 14:08:43 acher Exp $
+ * $Id: usb-uhci.c,v 1.275 2002/01/19 20:57:33 acher Exp $
*/
#include <linux/config.h>
@@ -34,6 +34,7 @@
#include <linux/init.h>
#include <linux/version.h>
#include <linux/pm.h>
+#include <linux/timer.h>
#include <asm/uaccess.h>
#include <asm/io.h>
@@ -52,7 +53,7 @@
/* This enables an extra UHCI slab for memory debugging */
#define DEBUG_SLAB
-#define VERSTR "$Revision: 1.268 $ time " __TIME__ " " __DATE__
+#define VERSTR "$Revision: 1.275 $ time " __TIME__ " " __DATE__
#include <linux/usb.h>
#include "usb-uhci.h"
@@ -61,7 +62,7 @@
/*
* Version Information
*/
-#define DRIVER_VERSION "v1.268"
+#define DRIVER_VERSION "v1.275"
#define DRIVER_AUTHOR "Georg Acher, Deti Fliegl, Thomas Sailer, Roman Weissgaerber"
#define DRIVER_DESC "USB Universal Host Controller Interface driver"
@@ -71,6 +72,9 @@
#define DEBUG_SYMBOLS
#ifdef DEBUG_SYMBOLS
#define _static
+ #ifndef EXPORT_SYMTAB
+ #define EXPORT_SYMTAB
+ #endif
#else
#define _static static
#endif
@@ -1182,6 +1186,7 @@
// cleanup the rest
switch (usb_pipetype (urb->pipe)) {
+ case PIPE_INTERRUPT:
case PIPE_ISOCHRONOUS:
uhci_wait_ms(1);
uhci_clean_iso_step2(s, urb_priv);
@@ -1779,17 +1784,15 @@
type = usb_pipetype (urb->pipe);
hcpriv = (urb_priv_t*)urb->hcpriv;
-
- if ( urb->timeout &&
- ((hcpriv->started + urb->timeout) < jiffies)) {
+
+ if ( urb->timeout && time_after(jiffies, hcpriv->started +
+urb->timeout)) {
urb->transfer_flags |= USB_TIMEOUT_KILLED | USB_ASYNC_UNLINK;
async_dbg("uhci_check_timeout: timeout for %p",urb);
uhci_unlink_urb_async(s, urb, UNLINK_ASYNC_STORE_URB);
}
#ifdef CONFIG_USB_UHCI_HIGH_BANDWIDTH
else if (((type == PIPE_BULK) || (type == PIPE_CONTROL)) &&
- (hcpriv->use_loop) &&
- ((hcpriv->started + IDLE_TIMEOUT) < jiffies))
+ (hcpriv->use_loop) && time_after(jiffies, hcpriv->started +
+IDLE_TIMEOUT))
disable_desc_loop(s, urb);
#endif
@@ -2445,7 +2448,7 @@
break;
}
- if (!desc->hw.td.status & cpu_to_le32(TD_CTRL_IOC)) {
+ if (!(desc->hw.td.status & cpu_to_le32(TD_CTRL_IOC))) {
// do not process one-shot TDs, no recycling
break;
}
@@ -2509,6 +2512,8 @@
}
else {
uhci_unlink_urb_async(s, urb, UNLINK_ASYNC_STORE_URB);
+ // correct toggle after unlink
+ usb_dotoggle (urb->dev, usb_pipeendpoint (urb->pipe),
+usb_pipeout (urb->pipe));
clr_td_ioc(desc); // inactivate TD
}
}
@@ -2738,7 +2743,7 @@
if (status != 1) {
// Avoid too much error messages at a time
- if ((jiffies - s->last_error_time > ERROR_SUPPRESSION_TIME)) {
+ if (time_after(jiffies, s->last_error_time + ERROR_SUPPRESSION_TIME)) {
warn("interrupt, status %x, frame# %i", status,
UHCI_GET_CURRENT_FRAME(s));
s->last_error_time = jiffies;
@@ -2786,7 +2791,7 @@
break;
}
}
- if ((jiffies - s->timeout_check) > (HZ/30))
+ if (time_after(jiffies, s->timeout_check + (HZ/30)))
uhci_check_timeouts(s);
clean_descs(s, CLEAN_NOT_FORCED);
@@ -2815,7 +2820,7 @@
_static void start_hc (uhci_t *s)
{
unsigned int io_addr = s->io_addr;
- int timeout = 1000;
+ int timeout = 10;
/*
* Reset the HC - this will force us to get a
@@ -2830,6 +2835,7 @@
err("USBCMD_HCRESET timed out!");
break;
}
+ udelay(1);
}
/* Turn on all interrupts */
@@ -2845,7 +2851,8 @@
s->running = 1;
}
-_static void __devexit
+/* No __devexit, since it maybe called from alloc_uhci() */
+_static void
uhci_pci_remove (struct pci_dev *dev)
{
uhci_t *s = pci_get_drvdata(dev);
@@ -3070,7 +3077,7 @@
id_table: &uhci_pci_ids [0],
probe: uhci_pci_probe,
- remove: __devexit_p(uhci_pci_remove),
+ remove: uhci_pci_remove,
#ifdef CONFIG_PM
suspend: uhci_pci_suspend,
@@ -3130,4 +3137,3 @@
MODULE_AUTHOR( DRIVER_AUTHOR );
MODULE_DESCRIPTION( DRIVER_DESC );
MODULE_LICENSE("GPL");
-
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
